MSM50BRHF
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN MSE504BRHFRSS
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN MSE504BRHFRSS is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | TuSDHSc2d3 |
| Bearing - Housing - Seal | MSE504BRHRSS |
| Bearing Number | MSE504BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bolt Size | 4 x M24 |
| Ca - Axial Load Rating | 10206 lbf45.40 kN |
| Cor - Static Load Rating | 183669 lbf817 kN |
| Cr - Dynamic Load Rating | 134885 lbf600 kN |
| Dimension H | 114 mm4.5 in |
| Dimension L | 207 mm8.2 in |
| Dimension N | 377.82 mm14.875 in |
| Dimension P | 25 mm1.0 in |
| Dimension R | 444 mm17.5 in |
| Dimension T | 508 mm20.0 in |
| Dimension V | 3 mm0.1 in |
| Maximum Speed | 1450 rpm |
| Note | This product line was formerly known as Revolvo |
| Seal Type | Viton Single Lip |
| Series Type | Medium Series |
| Shaft Size | 5.250 in |
| Support Type | Round Flange |
TAMC11K050S
📏 Dimensions on request
QVVPA20V308S
📏 Dimensions on request
GYE35KRRB SGT
📏 Dimensions on request
QVVMC20V085S
📏 Dimensions on request
E-PF-TRB-2 1/2-ECC
📏 Dimensions on request
SUCBFL207/FVSL613
📏 Dimensions on request
SN 317C 2
📏 Dimensions on request
QVVFX28V125S
📏 Dimensions on request
QVP22V311S
📏 Dimensions on request
RAK 2 11/16
📏 Dimensions on request
QVPR19V303S
📏 Dimensions on request
TAPKT15K208S
📏 Dimensions on request