QAPR15A212S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPKT15K208S
Ball Bearing Units · Dimensions on request
Series 10.40 KgSeries 23 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPKT15K208S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10.40 KgSeries 23 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.40 KgSeries 23 lb |
| Catalogue Ref. | TyWyAj9k9H |
| Adapter Sleeve Axial Movement Max | 0.Series 8 mm0.03 in |
| Adapter Sleeve Axial Movement Min | 0.6 mm0.022 in |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lbSeries 222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 88.9 mm3.50 in |
| Dimension B | 173.7 mm6.84 in |
| Dimension C | 98 mm3.86 in |
| Dimension D Max | 265.2 mmSeries 10.44 in |
| Dimension D Min | 230.1 mm9.06 in |
| Dimension F | 330.20 mm13.000 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 81.Series 8 mm3.22 in |
| Dimension S | 72.9 mm2.87 in |
| Dimension Series G | 73.90 mm2.910 in |
| Dimension Series M | 43.9 mm1.73 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPKT15K208ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - Series M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.051 mm0.0020 in |
| Int Radial Clearance Reduction Min | 0.038 mm0.0015 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - Series M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Post Install Int Radial Clearance Min | 0.043 mm0.0017 in |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 2-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.089 mm0.0035 in |
| UPC Code | 0883450278591 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
SNT 524-620 - 22320 - TA320
📏 Dimensions on request
LSE404BXHG
📏 Dimensions on request
SDAF 22238
📏 Dimensions on request
QVVCW14V065S
📏 Dimensions on request
LSM140BRHFATL
📏 Dimensions on request
LSE207BRHFRSS
📏 Dimensions on request
LSM45BXHGRSS
📏 Dimensions on request
SAF 22513 2-1/4
📏 Dimensions on request
NAU4LKBFL204-12
📏 Dimensions on request
UK217 - H2317
📏 Dimensions on request
LSM155BRHF
📏 Dimensions on request