TAPKT15K208S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPR19V303S
Ball Bearing Units · Dimensions on request
22.2 Kg49.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPR19V303S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 22.2 Kg49.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 22.2 Kg49.0 lb |
| Catalogue Ref. | Ty5IRJ2H1v |
| Bearing Number | 22219 |
| C - Dynamic Load (Basic) | 86600 lb385 kN |
| C0 - Static Load | 99000 lb441 kN |
| Dimension A | 95.3 mm3.75 in |
| Dimension B | 195.3 mm7.69 in |
| Dimension C | 124.5 mm4.9 in |
| Dimension D Max | 285.8 mm11.25 in |
| Dimension D Min | 235.0 mm9.25 in |
| Dimension E | 60.5 mm2.38 in |
| Dimension F | 346.2 mm13.63 in |
| Dimension G | 95.30 mm3.7500 in |
| Dimension H | 39.6 mm1.56 in |
| Dimension J (Bolt Size) | 20 mm0.750 in |
| Dimension L | 106.4 mm4.19 in |
| Dimension RV | 7.4 mm0.29 in |
| Dimension SV | 93.7 mm3.69 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPR19V303ST |
| Grease Lubrication - B/C/O Seal | 950 rpm |
| Grease Lubrication - M/N Seal | 1300 rpm |
| Grease Lubrication - T Seal | 1800 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - M/N Seal | 1300 rpm |
| Oil Lubrication - T Seal | 2200 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 3-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450297110 |
| Y1 - Geometry Factor | 2.88 |
| Y2 - Geometry Factor | 4.29 |
| e - Geometry Factor | 0.23 |
QAPR15A212S
📏 Dimensions on request
SNT 524-620 - 22320 - TA320
📏 Dimensions on request
LSE404BXHG
📏 Dimensions on request
SDAF 22238
📏 Dimensions on request
QVVCW14V065S
📏 Dimensions on request
LSM140BRHFATL
📏 Dimensions on request
LSE207BRHFRSS
📏 Dimensions on request
LSM45BXHGRSS
📏 Dimensions on request
SAF 22513 2-1/4
📏 Dimensions on request
NAU4LKBFL204-12
📏 Dimensions on request
UK217 - H2317
📏 Dimensions on request