FSNT 515-612 - 22215K - VR515
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-1 1/2-ECC
Ball Bearing Units · Dimensions on request
Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-1 1/2-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10 lb |
| Catalogue Ref. | 8aXkfRe0fu |
| C0 Static Load Rating | 33000 lb |
| Dimension A1 | 11/16 in |
| Dimension A2 | 2-Series 5/16 in |
| Dimension Ac | 3.2945 in |
| Dimension B | 3-3/Series 8 in |
| Dimension H | 4-3/4 in |
| Dimension H1 | 4 in |
| Dimension H2 | 3-Series 5/16 in |
| Dimension L | 6 in |
| Dimension L1 | 3-Series 13/16 in |
| Dimension L2 | 15/16 in |
| Dimension L3 | 3-1/4 in |
| Dimension N | 1-1/Series 8 in |
| Dimension N1 | 3/4 in |
| Dimension N2 | 1-15/16 in |
| Dimension d1 | 3-3/16 in |
| Dimension d2 | 3.95 in |
| K Factor | 1.36 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.5 in |
| Shaft Size Type | Imperial |
| Type E Closed Cover Number | EUC-C |
| UPC Code | 0883450505222 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| Y (if Fa/Fr > e) | 2.37 |
| e | 0.44 |
QAAF10A050S
📏 Dimensions on request
SAF 22532
📏 Dimensions on request
HSM150BRHF
📏 Dimensions on request
MSE1000BXHFRSS
📏 Dimensions on request
SUCPLP206/FVSL613
📏 Dimensions on request
DVP17K075S
📏 Dimensions on request
V100C65-0 1
📏 Dimensions on request
QAAPF15A300S
📏 Dimensions on request
SDAF 23192
📏 Dimensions on request
EUC-G
📏 Dimensions on request
ECP-U209
📏 Dimensions on request
E-TU-TRB-40MM-ECO/ECC
📏 Dimensions on request
CM-UKF211D1;H2311X
📏 Dimensions on request