V100C65-0 1
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVP17K075S
Ball Bearing Units · Dimensions on request
14.5 KgSeries 32 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVP17K075S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 14.5 KgSeries 32 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 14.5 KgSeries 32 lb |
| Catalogue Ref. | 8cWYB9685K |
| Adapter Sleeve Axial Movement Min | 0.7 mm0.027 in |
| Bearing Number | 22217 |
| C - Dynamic Load (Basic) | 66900 lb297 kN |
| C0 - Static Load | 71900 lb320 kN |
| Dimension A | 82.6 mm3.25 in |
| Dimension B | 173.2 mm6.82 in |
| Dimension C | 110 mm4.Series 33 in |
| Dimension D Max | 244.3 mm9.62 in |
| Dimension D Min | 200.2 mm7.88 in |
| Dimension F | 295.4 mm11.63 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | Series 20 mm0.750 in |
| Dimension L | 88.1 mm3.47 in |
| Dimension S | 82 mm3.23 in |
| Dimension Series G | 76.200 mm3.0000 in |
| Dimension Series M | 49.Series 8 mm1.96 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | DVP17K075ST |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - Series M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.064 mm0.0025 in |
| Int Radial Clearance Reduction Min | 0.046 mm0.0018 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Oil Lubrication - Series M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 75 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450273459 |
| Y1 - Geometry Factor | 3.07 |
| Y2 - Geometry Factor | 4.57 |
| e - Geometry Factor | 0.22 |
QAAPF15A300S
📏 Dimensions on request
SDAF 23192
📏 Dimensions on request
EUC-G
📏 Dimensions on request
ECP-U209
📏 Dimensions on request
E-TU-TRB-40MM-ECO/ECC
📏 Dimensions on request
CM-UKF211D1;H2311X
📏 Dimensions on request
QAC20A400S
📏 Dimensions on request
E-TTU-TRB-90MM
📏 Dimensions on request
QMCW30J140S
📏 Dimensions on request
SCJ1 5/8
📏 Dimensions on request
LSE814BXHFATL
📏 Dimensions on request
TAS 1 9/16
📏 Dimensions on request
CM-UKF209D1;H2309X
📏 Dimensions on request