CM-UKF211D1;H2311X
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-40MM-ECO/ECC
Ball Bearing Units · Dimensions on request
10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-40MM-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 10 lb |
| Catalogue Ref. | 8dEgbP8a8g |
| C0 Static Load Rating | 33000 lb |
| Dimension A1 | 11/16 in |
| Dimension A2 | 2-5/16 in |
| Dimension Ac | 4.3765 in |
| Dimension B | 3-3/8 in |
| Dimension H | 4-3/4 in |
| Dimension H1 | 4 in |
| Dimension H2 | 3-5/16 in |
| Dimension L | 6 in |
| Dimension L1 | 3-13/16 in |
| Dimension L2 | 15/16 in |
| Dimension L3 | 3-1/4 in |
| Dimension N | 1-1/8 in |
| Dimension N1 | 3/4 in |
| Dimension N2 | 1-15/16 in |
| Dimension d1 | 3-3/16 in |
| Dimension d2 | 3.95 in |
| K Factor | 1.36 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 40 mm1.575 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-C |
| Type E Open Cover Number | EUDR-40MM |
| UPC Code | 0883450506588 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| Y (if Fa/Fr > e) | 2.37 |
| e | 0.44 |
QAC20A400S
📏 Dimensions on request
E-TTU-TRB-90MM
📏 Dimensions on request
QMCW30J140S
📏 Dimensions on request
SCJ1 5/8
📏 Dimensions on request
LSE814BXHFATL
📏 Dimensions on request
TAS 1 9/16
📏 Dimensions on request
CM-UKF209D1;H2309X
📏 Dimensions on request
SUCBF204/FVSL613
📏 Dimensions on request
SNT 505 - 22205K - TA505/ 3/4
📏 Dimensions on request
SUCATBYM206-20/FVSL613
📏 Dimensions on request
LSE500BXHFKPS
📏 Dimensions on request
SNT 210 - 22210 - VR210
📏 Dimensions on request
LAK 15/16
📏 Dimensions on request