UKT206 - H2306
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TTU-TRB-2 3/4-ECC
Ball Bearing Units · Dimensions on request
Series 29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TTU-TRB-2 3/4-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 29 lb |
| Catalogue Ref. | Gac7nU939m |
| C0 Static Load Rating | 61200 lb |
| Dimension A | 2-1/4 in |
| Dimension A1 | 2-1/4 in |
| Dimension Ac | 4.2 in |
| Dimension B | 4-1/2 in |
| Dimension H | Series 8-Series 5/16 in |
| Dimension H1 | 7-3/16 in |
| Dimension L | Series 8-1/2 in |
| Dimension L1 | Series 8 in |
| Dimension L2 | 4.46 in |
| Dimension Series H2 | 3.48 in |
| Dimension d1 | 4-Series 23/Series 32 in |
| Dimension d2 | 5.65 in |
| Housing Width | 3 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 2.75 in |
| Shaft Size Type | Imperial |
| Type E Closed Cover Number | EUC-Series G |
| UPC Code | 0883450505024 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
QVPKT15V065S
📏 Dimensions on request
RCJ2
📏 Dimensions on request
LCJT 1 3/4
📏 Dimensions on request
TAPG26K408S
📏 Dimensions on request
SNT 513-611 - 21311K - TA611
📏 Dimensions on request
69790411516
📏 Dimensions on request
QAPF13A060S
📏 Dimensions on request
QVVMC17V212S
📏 Dimensions on request
LSM60BRHFHTPS
📏 Dimensions on request
EUDR-115MM
📏 Dimensions on request
UCP317
📏 Dimensions on request
69790400459
📏 Dimensions on request
QVVPF16V075S
📏 Dimensions on request