QAPF13A060S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790411516
Ball Bearing Units · Dimensions on request
40.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790411516 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 40.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 40.00 lb |
| Catalogue Ref. | Gd03T6anaZ |
| Bore Size | 3 Series 5/Series 8 in |
| Color | Metallic |
| Complete Coupling Weight | 130.00 lb |
| Coupling Type | Gear |
| Cubic inches | 177.02750 in3 |
| Dimension AD | Series 238.25 mm9.380 in |
| Dimension D | 200.91 mm7.910 in |
| Dimension FD | 279.40 mm11.00 in |
| Dimension HD | 165.Series 10 mm6.5 in |
| Distance between Shaft Ends (Dimension BSE) | 6.35 mm0.250 in |
| Features | Molded seals maintain proper lubricant retention during misalignment conditionsAISI 4140 Alloy Steel Construction Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | Alloy Steel |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 7/Series 8 x 7/16 in |
| Length Through Bore (LTB) | 106.43 mm4.190 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 124 mm4.625 in |
| Max. Speed (Balanced) | 5250 rpm |
| Max. Speed (Unbalanced) | 3500 rpm |
| Nominal Torque | 20000 N·m177000 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 219.20 mmSeries 8.63 in |
| Parallel Misalignment | 0.130 in |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 3 1/2 |
| Style | Bored |
| Type | Gear Coupling Hubs |
| Width | 6.500 in |
QVVMC17V212S
📏 Dimensions on request
LSM60BRHFHTPS
📏 Dimensions on request
EUDR-115MM
📏 Dimensions on request
UCP317
📏 Dimensions on request
69790400459
📏 Dimensions on request
QVVPF16V075S
📏 Dimensions on request
LSE704BRHFATL
📏 Dimensions on request
SAF 22334
📏 Dimensions on request
FYJ 55 KF
📏 Dimensions on request
MSE211BXHFHTPS
📏 Dimensions on request
QMPL15J300S
📏 Dimensions on request
QVVFX19V085S
📏 Dimensions on request
LSE503BXHGHTPS
📏 Dimensions on request