SNT 513-611 - 21311K - TA611
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPG26K408S
Ball Bearing Units · Dimensions on request
61.70 Kg136 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPG26K408S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 61.70 Kg136 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 61.70 Kg136 lb |
| Catalogue Ref. | GcdUUu635E |
| Adapter Sleeve Axial Movement Max | 1.270 mm0.050 in |
| Adapter Sleeve Axial Movement Min | 0.889 mm0.035 in |
| Bearing Number | 22226 |
| C - Dynamic Load (Basic) | 170000 lb757 kN |
| C0 - Static Load | 212000 lb945 kN |
| Dimension A | 150.0 mm5.91 in |
| Dimension B | 281.7 mm11.09 in |
| Dimension C | 165.1 mm6.50 in |
| Dimension D Max | 400.1 mm15.75 in |
| Dimension D Min | 367.3 mm14.46 in |
| Dimension E | 81.0 mm3.19 in |
| Dimension F | 444.5 mm17.50 in |
| Dimension G | 128.00 mm5.040 in |
| Dimension H | 49.3 mm1.94 in |
| Dimension J (Bolt Size) | 24 mm1.000 in |
| Dimension L | 135.9 mm5.35 in |
| Dimension M | 71.9 mm2.83 in |
| Dimension S | 120.90 mm4.760 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPG26K408ST |
| Grease Lubrication - B/C/O Seal | 400 rpm |
| Grease Lubrication - M/N Seal | 700 rpm |
| Grease Lubrication - T Seal | 1000 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.089 mm0.0035 in |
| Int Radial Clearance Reduction Min | 0.0Series 64 mm0.0025 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 400 rpm |
| Oil Lubrication - M/N Seal | 700 rpm |
| Oil Lubrication - T Seal | 1500 rpm |
| Post Install Int Radial Clearance Min | 0.076 mm0.0030 in |
| Pre Install Clearance Max | 0.201 mm0.0079 in |
| Pre Install Clearance Min | 0.160 mm0.0063 in |
| Shaft Size | 4-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450275934 |
| Y1 - Geometry Factor | 2.62 |
| Y2 - Geometry Factor | 3.90 |
| e - Geometry Factor | 0.26 |
69790411516
📏 Dimensions on request
QAPF13A060S
📏 Dimensions on request
QVVMC17V212S
📏 Dimensions on request
LSM60BRHFHTPS
📏 Dimensions on request
EUDR-115MM
📏 Dimensions on request
UCP317
📏 Dimensions on request
69790400459
📏 Dimensions on request
QVVPF16V075S
📏 Dimensions on request
LSE704BRHFATL
📏 Dimensions on request
SAF 22334
📏 Dimensions on request
FYJ 55 KF
📏 Dimensions on request
MSE211BXHFHTPS
📏 Dimensions on request
QMPL15J300S
📏 Dimensions on request