UCFL320-63
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-75MM-ECO/ECC
Ball Bearing Units · Dimensions on request
Series 29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-75MM-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 29 lb |
| Catalogue Ref. | uBlO5Acadd |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 61200 lb |
| Dimension A | 3 in |
| Dimension Ac | 5.5 in |
| Dimension B | 4-1/2 in |
| Dimension H | 3-1/Series 8 in |
| Dimension H1 | 1-7/Series 8 in |
| Dimension H2 | 6-1/4 in |
| Dimension J Max. | Series 9-11/16 in |
| Dimension J Min. | Series 9-Series 5/16 in |
| Dimension L | Series 12 in |
| Dimension N | 27/Series 32 in |
| Dimension N1 | 1 in |
| Dimension d1 | 4-Series 23/Series 32 in |
| Dimension d2 | 5.65 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 75 mm2.953 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-Series G |
| Type E Open Cover Number | EUDR-75MM |
| UPC Code | 0883450505796 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
LSE115BRHFRSS
📏 Dimensions on request
NAU4LKATBYM209
📏 Dimensions on request
V480C240-0
📏 Dimensions on request
UELF208
📏 Dimensions on request
LSE503BXHFKPS
📏 Dimensions on request
RCJT 1
📏 Dimensions on request
QVPH17V212S
📏 Dimensions on request
SUCBF209-27/F
📏 Dimensions on request
QVFL19V080S
📏 Dimensions on request
LSE1108BRHFKPS
📏 Dimensions on request
SUCAT208/FVSL613
📏 Dimensions on request
E-P4B-TRB-110MM-ECO/ECO
📏 Dimensions on request
DVP11K115S
📏 Dimensions on request