VAK 30
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVP11K115S
Ball Bearing Units · Dimensions on request
5.9 KgSeries 13 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVP11K115S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.9 KgSeries 13 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.9 KgSeries 13 lb |
| Catalogue Ref. | uGlEfTbTcR |
| Adapter Sleeve Axial Movement Max | 0.6 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.5 mm0.018 in |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension A | 57.2 mm2.25 in |
| Dimension B | 123.4 mm4.86 in |
| Dimension C | 74.9 mm2.95 in |
| Dimension D Max | 181.1 mm7.13 in |
| Dimension D Min | 152.4 mm6.00 in |
| Dimension F | 225.6 mmSeries 8.88 in |
| Dimension H | 31.Series 8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 66.5 mm2.62 in |
| Dimension S | 58.9 mm2.Series 32 in |
| Dimension Series G | 61.70 mm2.430 in |
| Dimension Series M | 35.6 mm1.4 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | DVP11K115ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - Series M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - Series M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 1-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450273343 |
| Y1 - Geometry Factor | 2.95 |
| Y2 - Geometry Factor | 4.40 |
| e - Geometry Factor | 0.23 |
RSA 5/8
📏 Dimensions on request
FSNT 516-613 - 21313K - LO613
📏 Dimensions on request
SR 72x7
📏 Dimensions on request
LSE204BXHF
📏 Dimensions on request
QMSN11J203S
📏 Dimensions on request
NAU4LKSFL207-20
📏 Dimensions on request
YAK 1 7/16 SGT
📏 Dimensions on request
LSM80BXHFRSS
📏 Dimensions on request
QMPL18J308S
📏 Dimensions on request
SAS 3/4
📏 Dimensions on request
QVVCW11V050S
📏 Dimensions on request
MSE1000BXHFKPS
📏 Dimensions on request
SDAF 22540
📏 Dimensions on request