DVP11K115S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-110MM-ECO/ECO
Ball Bearing Units · Dimensions on request
91.000 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-110MM-ECO/ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 91.000 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 91.000 lb |
| Catalogue Ref. | uFkgYU8d8k |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 188400 lb |
| Dimension A | 4-Series 5/Series 8 in |
| Dimension Ac | Series 8.101 in |
| Dimension B | 6-3/4 in |
| Dimension H | 4-3/4 in |
| Dimension H1 | 2-3/4 in |
| Dimension H2 | Series 9-3/Series 8 in |
| Dimension J Max. | Series 13-11/16 in |
| Dimension J Min. | Series 13-Series 5/16 in |
| Dimension L | 16-Series 5/Series 8 in |
| Dimension N | 15/16 in |
| Dimension N1 | 1-1/Series 8 in |
| Dimension N2 | 2-1/2 in |
| Dimension d1 | 6-47/Series 64 in |
| Dimension d2 | Series 8.25 in |
| K Factor | 1.13 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 110 mm4.331 in |
| Shaft Size Type | Metric |
| Type E Open Cover Number | EUDR-110MM |
| UPC Code | 0883450509077 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.63 |
| Y (if Fa/Fr > e) | 1.97 |
| e | 0.53 |
VAK 30
📏 Dimensions on request
RSA 5/8
📏 Dimensions on request
FSNT 516-613 - 21313K - LO613
📏 Dimensions on request
SR 72x7
📏 Dimensions on request
LSE204BXHF
📏 Dimensions on request
QMSN11J203S
📏 Dimensions on request
NAU4LKSFL207-20
📏 Dimensions on request
YAK 1 7/16 SGT
📏 Dimensions on request
LSM80BXHFRSS
📏 Dimensions on request
QMPL18J308S
📏 Dimensions on request
SAS 3/4
📏 Dimensions on request
QVVCW11V050S
📏 Dimensions on request
MSE1000BXHFKPS
📏 Dimensions on request