15 models with a 7 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 9 mm to 10 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| IR7X10X10.5 | ANDGE | Bearing Accessories | 10.5 | — | |
| IR7X10X12 | ANDGE | Bearing Accessories | 12 | Cross-ref → | |
| IR7X10X16 | ANDGE | Bearing Accessories | 16 | Cross-ref → | |
| LR7X10X10.5 | ANDGE | Bearing Accessories | 10.5 | — | |
| LRT 7910 | IKO | Bearing Accessories | 9 | 10 | — |
| FIR-071010 | NSK | Bearing Accessories | 10 | 10.5 | — |
| FIR-071012 | NSK | Bearing Accessories | 10 | 12.5 | — |
| FIR-071015 | NSK | Bearing Accessories | 10 | 15.5 | — |
| FIR-71012-1 | NSK | Bearing Accessories | 10 | 12 | — |
| IRT 710 | IKO | Bearing Accessories | 10 | 10.5 | — |
| IRT 712 | IKO | Bearing Accessories | 10 | 12.5 | — |
| IRT 715 | IKO | Bearing Accessories | 10 | 15.5 | — |
| LRT 71012 | IKO | Bearing Accessories | 10 | 12 | — |
| LRT 71012-1 | IKO | Bearing Accessories | 10 | 12 | — |
| LRT 71016 | IKO | Bearing Accessories | 10 | 16 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.