21 models with a 660.4 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 812.8 mm to 863.6 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| NUP 4Series 64776Q4/C9YA4 | ANDGE | Cylindrical Roller Bearings | 107.95 | — | |
| NUP 4Series 64777Q4/C9YA4 | ANDGE | Cylindrical Roller Bearings | 107.95 | — | |
| NUP6/660.4Q4/C9- | ANDGE | Cylindrical Roller Bearings | 108 | — | |
| 928/660.4QU | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NU6/660.4M/YA5 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP 464776 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP 464776Q4/C9YA4 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP 464776Q4/C9YB-1 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP 464776Q4/C9YB2 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP 464776Q4/P6C9YA4 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP6/660.4/YA | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| NUP6/660.4M/P6 | ANDGE | Cylindrical Roller Bearings | 812.8 | 107.95 | — |
| 464777 | SKF | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| 929/660.4Q | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| 929/660.4QU | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP 464777 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP 464777Q4/C3YA4 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP 464777Q4/C9YA4 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP 464777Q4/P6C9YA4 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP 6/660.4Q1/C9 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
| NUP6/660.4 | ANDGE | Cylindrical Roller Bearings | 863.6 | 107.95 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.