21 models with a 63.5 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 68.263 mm to 111.125 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| PCZ 4032 B | SKF | Spherical Plain Bearings | 68.263 | 50.8 | — |
| PCZ 4032 M | SKF | Spherical Plain Bearings | 68.263 | 50.8 | — |
| PCZ 4040 B | SKF | Spherical Plain Bearings | 68.263 | 63.5 | — |
| PCZ 4040 M | SKF | Spherical Plain Bearings | 68.263 | 63.5 | — |
| PCZ 4048 B | SKF | Spherical Plain Bearings | 68.263 | 76.2 | — |
| PCZ 4056 B | SKF | Spherical Plain Bearings | 68.263 | 88.9 | — |
| SBB 40 | IKO | Spherical Plain Bearings | 100.01 | 55.55 | — |
| SBB 40-2RS | IKO | Spherical Plain Bearings | 100.01 | 55.55 | — |
| GACZ63S | ANDGE | Spherical Plain Bearings | 100.013 | 36.07 | Cross-ref → |
| GEWZ63ES | ANDGE | Spherical Plain Bearings | 100.013 | 95.25 | Cross-ref → |
| GEWZ63ES-2RS | ANDGE | Spherical Plain Bearings | 100.013 | 95.25 | Cross-ref → |
| GEZ 208 ES | SKF | Spherical Plain Bearings | 100.013 | 55.55 | — |
| GEZ 208 ES-2RS | SKF | Spherical Plain Bearings | 100.013 | 55.55 | — |
| GEZ 208 TXE-2LS | SKF | Spherical Plain Bearings | 100.013 | 55.55 | — |
| GEZ63ES | ANDGE | Spherical Plain Bearings | 100.013 | 55.55 | Cross-ref → |
| GEZ63ES-2RS | ANDGE | Spherical Plain Bearings | 100.013 | 55.55 | Cross-ref → |
| GEZ63ET-2RS | ANDGE | Spherical Plain Bearings | 100.013 | 55.55 | Cross-ref → |
| GEZM 208 ES | SKF | Spherical Plain Bearings | 100.013 | 95.25 | — |
| GEZM 208 ES-2RS | SKF | Spherical Plain Bearings | 100.013 | 95.25 | — |
| GEGZ63ES | ANDGE | Spherical Plain Bearings | 111.125 | 64.643 | Cross-ref → |
| GEGZ63ES-2RS | ANDGE | Spherical Plain Bearings | 111.125 | 64.643 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.