166 models with a 60 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 65.1 mm to 241 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 8.67 | ANDGE | Ball Bearing Units | 80 | — | |
| FY 60 FM | SKF | Ball Bearing Units | 73.6 | — | |
| FY 60 TF | SKF | Ball Bearing Units | 73.7 | — | |
| FY 60 TR | SKF | Ball Bearing Units | 73.7 | — | |
| FY 60 WF | SKF | Ball Bearing Units | 80.8 | — | |
| FY Series 60 TF/VA201 | SKF | Ball Bearing Units | — | ||
| FY Series 60 TF/VA228 | SKF | Ball Bearing Units | — | ||
| FYC 60 FM | SKF | Ball Bearing Units | 56.9 | — | |
| FYC 60 TF | SKF | Ball Bearing Units | 56.7 | — | |
| FYC 60 WF | SKF | Ball Bearing Units | 64.1 | — | |
| FYJ 60 TF | SKF | Ball Bearing Units | 68.7 | — | |
| FYNT 60 F | SKF | Ball Bearing Units | 78.7 | — | |
| FYNT 60 L | SKF | Ball Bearing Units | 78.7 | — | |
| HCFU212 | ANDGE | Ball Bearing Units | — | ||
| HCP212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| HCP312 | ANDGE | Ball Bearing Units | 85 | — | |
| SAF212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| SAP212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| SBF212G | ANDGE | Ball Bearing Units | — | ||
| SBFL212G | ANDGE | Ball Bearing Units | 250 | — | |
| SBP212 | ANDGE | Ball Bearing Units | — | ||
| SBP212G | ANDGE | Ball Bearing Units | 53.7 | — | |
| SNU513-611 | ANDGE | Ball Bearing Units | 30 | — | |
| SNU613 | ANDGE | Ball Bearing Units | 90 | — | |
| SY 60 FM | SKF | Ball Bearing Units | 138 | — | |
| SY 60 PF | SKF | Ball Bearing Units | 138 | — | |
| SY 60 TF | SKF | Ball Bearing Units | 138 | — | |
| SY 60 TR | SKF | Ball Bearing Units | 138 | — | |
| SY 60 WF | SKF | Ball Bearing Units | 138 | — | |
| SYJ 60 TF | SKF | Ball Bearing Units | 138 | — | |
| SYNT 60 F | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 FTF | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 FTS | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 FW | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 L | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 LTF | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 LTS | SKF | Ball Bearing Units | 151 | — | |
| SYNT 60 LW | SKF | Ball Bearing Units | 151 | — | |
| TUJ 60 TF | SKF | Ball Bearing Units | 146 | — | |
| UCC212 | ANDGE | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCC312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCF212 | FAG | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCF212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCF312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCFA212 | ANDGE | Ball Bearing Units | 238 | Cross-ref → | |
| UCFB212 | ANDGE | Ball Bearing Units | 84 | Cross-ref → | |
| UCFC212 | FAG | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCFL212 | FAG | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCFL212 | ANDGE | Ball Bearing Units | 250 | Cross-ref → | |
| UCFS212 | ANDGE | Ball Bearing Units | — | ||
| UCFS312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCFX12 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCHA212 | ANDGE | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCK312 | ANDGE | Ball Bearing Units | 178 | Cross-ref → | |
| UCP212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCP212 | FAG | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCP312 | ANDGE | Ball Bearing Units | 71 | Cross-ref → | |
| UCPX12 | ANDGE | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCST212 | ANDGE | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCT212 | FAG | Ball Bearing Units | 65.1 | Cross-ref → | |
| UKF213 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKF213 | FAG | Ball Bearing Units | Cross-ref → | ||
| UKF213+H2313 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKF313+H2313 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKFC213+H2313 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKFL213 | FAG | Ball Bearing Units | 258 | Cross-ref → | |
| UKFL213+H2313 | ANDGE | Ball Bearing Units | 258 | Cross-ref → | |
| UKFL313+H2313 | ANDGE | Ball Bearing Units | 295 | Cross-ref → | |
| UKFS313+H2313 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKP213 | FAG | Ball Bearing Units | 76.2 | Cross-ref → | |
| UKP213 | ANDGE | Ball Bearing Units | 76.2 | Cross-ref → | |
| UKP213+H2313 | ANDGE | Ball Bearing Units | 76.2 | Cross-ref → | |
| UKT213 | FAG | Ball Bearing Units | 111 | Cross-ref → | |
| FY60TF | SKF | Ball Bearing Units | 65.1 | 177 | — |
| SY60TF | SKF | Ball Bearing Units | 65.1 | 243 | — |
| UCK212 | ANDGE | Ball Bearing Units | 65.1 | 196 | Cross-ref → |
| UCPA212 | ANDGE | Ball Bearing Units | 69.9 | 150 | Cross-ref → |
| FY60WM | SKF | Ball Bearing Units | 77.8 | 177 | — |
| NANF212 | FYH | Ball Bearing Units | 77.8 | 177 | Cross-ref → |
| HC212 | ANDGE | Ball Bearing Units | 110 | 77.8 | Cross-ref → |
| HC212-60MM-GO-DBL | ANDGE | Ball Bearing Units | 110 | 27 | — |
| HC212-60MMR-GO | ANDGE | Ball Bearing Units | 110 | 27 | — |
| MG60R1-1M1 | ANDGE | Ball Bearing Units | 110 | 34 | — |
| NA212 | ANDGE | Ball Bearing Units | 110 | 77.8 | Cross-ref → |
| ND212 | ANDGE | Ball Bearing Units | 110 | 66.7 | — |
| RA212 | ANDGE | Ball Bearing Units | 110 | 24 | — |
| RB212 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| SA212F | ANDGE | Ball Bearing Units | 110 | 37.2 | — |
| SA212H | ANDGE | Ball Bearing Units | 110 | 37.2 | — |
| SB212 | ANDGE | Ball Bearing Units | 110 | 53.7 | Cross-ref → |
| SB212-36 | ANDGE | Ball Bearing Units | 110 | 53.7 | Cross-ref → |
| SB212H | ANDGE | Ball Bearing Units | 110 | 50.3 | — |
| SC212 | ANDGE | Ball Bearing Units | 110 | 22 | Cross-ref → |
| SD212 | ANDGE | Ball Bearing Units | 110 | 66.7 | — |
| SER212 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| SNV110-F-L + 1212 + DH212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212 + DHV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212 + FSV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212 + TSV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 20212 + DH212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 20212 + DHV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 20212 + FSV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 20212 + TSV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 2212 + DH212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 2212 + DHV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 2212 + FSV212 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 2212 + TSV212 | FAG | Ball Bearing Units | 110 | — | |
| UC212 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UC212 | FAG | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UC212-36 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UC212-37 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UC212-39 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UC212NW3/YA1 | ANDGE | Ball Bearing Units | 110 | 65.1 | — |
| UC212T | ANDGE | Ball Bearing Units | 110 | 65.1 | — |
| UE212 | ANDGE | Ball Bearing Units | 110 | 53.1 | — |
| UEL212 | ANDGE | Ball Bearing Units | 110 | 77.8 | Cross-ref → |
| UK212 | ANDGE | Ball Bearing Units | 110 | 41 | Cross-ref → |
| UK212+H2312 | ANDGE | Ball Bearing Units | 110 | 7.7 | Cross-ref → |
| UK212+HA2312 | ANDGE | Ball Bearing Units | 110 | 7.7 | — |
| UK212+HS2312 | ANDGE | Ball Bearing Units | 110 | 7.7 | — |
| UK212-34 | ANDGE | Ball Bearing Units | 110 | — | |
| MG60R2-1M11 | ANDGE | Ball Bearing Units | 110.8 | 32 | — |
| F513-A-L + 1213K | FAG | Ball Bearing Units | 120 | — | |
| F513-A-L + 20213K | FAG | Ball Bearing Units | 120 | — | |
| F513-B-L + 1213K | FAG | Ball Bearing Units | 120 | — | |
| F513-B-L + 20213K | FAG | Ball Bearing Units | 120 | — | |
| F513-WA-L + 2213K | FAG | Ball Bearing Units | 120 | — | |
| F513-WA-L + 22213K | FAG | Ball Bearing Units | 120 | — | |
| F513-WB-L + 2213K | FAG | Ball Bearing Units | 120 | — | |
| F513-WB-L + 22213K | FAG | Ball Bearing Units | 120 | — | |
| SNV120-F-L + 1213K + H213 + DH513 | FAG | Ball Bearing Units | 120 | — | |
| SNV120-F-L + 1213K + H213 + DHV513 | FAG | Ball Bearing Units | 120 | — | |
| SNV120-F-L + 1213K + H213 + FSV513 | FAG | Ball Bearing Units | 120 | — | |
| SNV120-F-L + 1213K + H213 + TSV513 | FAG | Ball Bearing Units | 120 | — | |
| SR2213(60) | ANDGE | Ball Bearing Units | 120 | 85.73 | — |
| UCX12-60MMR-GA | ANDGE | Ball Bearing Units | 120 | 27 | — |
| UK213 | FAG | Ball Bearing Units | 120 | 40 | Cross-ref → |
| HC312 | ANDGE | Ball Bearing Units | 130 | 79.4 | Cross-ref → |
| LOE312-N-AF-L | FAG | Ball Bearing Units | 130 | — | |
| LOE312-N-AL-L | FAG | Ball Bearing Units | 130 | — | |
| LOE312-N-BF-L | FAG | Ball Bearing Units | 130 | — | |
| LOE312-N-BL-L | FAG | Ball Bearing Units | 130 | — | |
| UC312 | ANDGE | Ball Bearing Units | 130 | 71 | Cross-ref → |
| UCPH212 | ANDGE | Ball Bearing Units | 130 | 236 | — |
| UK312 | ANDGE | Ball Bearing Units | 130 | 47 | Cross-ref → |
| VRE312-A | FAG | Ball Bearing Units | 130 | 31 | — |
| VRE312-B | FAG | Ball Bearing Units | 130 | 31 | — |
| VRE312-C | FAG | Ball Bearing Units | 130 | 31 | — |
| VRE312-D | FAG | Ball Bearing Units | 130 | 31 | — |
| VRE312-E | FAG | Ball Bearing Units | 130 | 31 | — |
| VRE312-F | FAG | Ball Bearing Units | 130 | 31 | — |
| MG60R2-6 | ANDGE | Ball Bearing Units | 135 | 42 | — |
| UK313+H2313 | ANDGE | Ball Bearing Units | 140 | 65 | Cross-ref → |
| MG60A6-1 | ANDGE | Ball Bearing Units | 149 | 36 | — |
| MG60B2-1M1 | ANDGE | Ball Bearing Units | 149.4 | 41.5 | — |
| LOE614-N-AF-L | FAG | Ball Bearing Units | 150 | — | |
| LOE614-N-AL-L | FAG | Ball Bearing Units | 150 | — | |
| LOE614-N-BF-L | FAG | Ball Bearing Units | 150 | — | |
| LOE614-N-BL-L | FAG | Ball Bearing Units | 150 | — | |
| MG60A1-10 | ANDGE | Ball Bearing Units | 150 | 45 | — |
| MG60A6-3 | ANDGE | Ball Bearing Units | 151 | 36 | — |
| DAC2F16 | ANDGE | Ball Bearing Units | 152 | — | |
| SAPF212 | ANDGE | Ball Bearing Units | 176 | 148 | — |
| NAFU212 | ANDGE | Ball Bearing Units | 177 | 143 | — |
| MG60E2-3 | ANDGE | Ball Bearing Units | 205 | 54.1 | — |
| UCPK212 | ANDGE | Ball Bearing Units | 241 | 191 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.