12 models with a 6 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 8 mm to 10 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 6x16x5 HMSA10 RG | SKF | Bearing Accessories | — | ||
| 6x16x7 HMSA10 V | SKF | Bearing Accessories | — | ||
| IR6X10X10 | ANDGE | Bearing Accessories | 10 | — | |
| IR6X10X12 | ANDGE | Bearing Accessories | 12 | — | |
| IR6X9X12 | ANDGE | Bearing Accessories | 12 | Cross-ref → | |
| IR6X9X16 | ANDGE | Bearing Accessories | 16 | Cross-ref → | |
| PUMP.NIPPLE-B-G1/4-G1/8 | FAG | Bearing Accessories | — | ||
| PUMP.NIPPLE-B-G3/4-G1/8 | FAG | Bearing Accessories | — | ||
| LRT 6810 | IKO | Bearing Accessories | 8 | 10 | — |
| LRT 6912 | IKO | Bearing Accessories | 9 | 12 | — |
| LRT 6916 | IKO | Bearing Accessories | 9 | 16 | — |
| LRT 61010 | IKO | Bearing Accessories | 10 | 10 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.