22 models with a 57.15 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 61.913 mm to 100.013 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| PCZ 3632 B | SKF | Spherical Plain Bearings | 61.913 | 50.8 | — |
| PCZ 3632 M | SKF | Spherical Plain Bearings | 61.913 | 50.8 | — |
| PCZ 3636 B | SKF | Spherical Plain Bearings | 61.913 | 57.15 | — |
| PCZ 3636 M | SKF | Spherical Plain Bearings | 61.913 | 57.15 | — |
| PCZ 3640 B | SKF | Spherical Plain Bearings | 61.913 | 63.5 | — |
| PCZ 3640 M | SKF | Spherical Plain Bearings | 61.913 | 63.5 | — |
| PCZ 3648 B | SKF | Spherical Plain Bearings | 61.913 | 76.2 | — |
| GEZ 204 ES | SKF | Spherical Plain Bearings | 90.487 | 50.013 | — |
| GEZ 204 ES-2RS | SKF | Spherical Plain Bearings | 90.487 | 50.013 | — |
| GACZ57S | ANDGE | Spherical Plain Bearings | 90.488 | 32.26 | Cross-ref → |
| GEWZ57ES | ANDGE | Spherical Plain Bearings | 90.488 | 85.725 | Cross-ref → |
| GEWZ57ES-2RS | ANDGE | Spherical Plain Bearings | 90.488 | 85.725 | Cross-ref → |
| GEZ 204 TXE-2LS | SKF | Spherical Plain Bearings | 90.488 | 50.013 | — |
| GEZ57ES | ANDGE | Spherical Plain Bearings | 90.488 | 50.013 | Cross-ref → |
| GEZ57ES-2RS | ANDGE | Spherical Plain Bearings | 90.488 | 50.013 | Cross-ref → |
| GEZ57ET-2RS | ANDGE | Spherical Plain Bearings | 90.488 | 50.013 | Cross-ref → |
| GEZM 204 ES | SKF | Spherical Plain Bearings | 90.488 | 85.725 | — |
| GEZM 204 ES-2RS | SKF | Spherical Plain Bearings | 90.488 | 85.725 | — |
| SBB 36 | IKO | Spherical Plain Bearings | 90.49 | 50.01 | — |
| SBB 36-2RS | IKO | Spherical Plain Bearings | 90.49 | 50.01 | — |
| GEGZ57ES | ANDGE | Spherical Plain Bearings | 100.013 | 58.877 | Cross-ref → |
| GEGZ57ES-2RS | ANDGE | Spherical Plain Bearings | 100.013 | 58.877 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.