29 models with a 560 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 560 mm to 980 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 560X600X18 HDS2 R | SKF | Bearing Accessories | — | ||
| AH240/560G | FAG | Bearing Accessories | — | ||
| AH39/560G | FAG | Bearing Accessories | — | ||
| OH 31/560 H | SKF | Bearing Accessories | — | ||
| OH 31/560 HE | SKF | Bearing Accessories | — | ||
| OH 32/560 H | SKF | Bearing Accessories | — | ||
| AOH 240/560 G | SKF | Bearing Accessories | 560 | 296 | — |
| AOH 31/560 | SKF | Bearing Accessories | 560 | 335 | — |
| OH 39/600 H | SKF | Bearing Accessories | 600 | 239 | — |
| OH 39/600 HE | SKF | Bearing Accessories | 600 | 239 | — |
| H240/560-HG | FAG | Bearing Accessories | 650 | 358 | — |
| HM 30/560 | SKF | Bearing Accessories | 650 | 75 | Cross-ref → |
| HME 30/560 | SKF | Bearing Accessories | 650 | 75 | — |
| Series WS Series 811/560 | SKF | Bearing Accessories | 665 | 25.5 | — |
| WS 811/560 | SKF | Bearing Accessories | 665 | 25.5 | — |
| GS 811/560 | SKF | Bearing Accessories | 670 | 25.5 | — |
| GS Series 811/560 | SKF | Bearing Accessories | 670 | 25.5 | — |
| H240/600-HG | FAG | Bearing Accessories | 700 | 377 | — |
| H30/600-HG | FAG | Bearing Accessories | 700 | 289 | — |
| HMV 112E | SKF | Bearing Accessories | 704 | 71 | — |
| H31/560-HG | FAG | Bearing Accessories | 710 | 377 | — |
| H32/560-HG | FAG | Bearing Accessories | 710 | 462 | — |
| HM 31/560 | SKF | Bearing Accessories | 710 | 85 | Cross-ref → |
| H241/600-HG | FAG | Bearing Accessories | 750 | 490 | — |
| H31/600-HG | FAG | Bearing Accessories | 750 | 399 | — |
| H33/600-HG | FAG | Bearing Accessories | 750 | 561 | — |
| C 39/600 KM + OH 39/600 HE * | SKF | Bearing Accessories | 800 | 150 | — |
| C 30/600 KM + OH 30/600 H * | SKF | Bearing Accessories | 870 | 200 | — |
| C 31/600 KMB + OH 31/600 HE * | SKF | Bearing Accessories | 980 | 300 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.