167 models with a 55 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 55.6 mm to 232 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 7.4 | ANDGE | Ball Bearing Units | 70 | — | |
| FY 55 FM | SKF | Ball Bearing Units | 67.4 | — | |
| FY 55 TF | SKF | Ball Bearing Units | — | ||
| FY 55 TR | SKF | Ball Bearing Units | — | ||
| FY 55 WF | SKF | Ball Bearing Units | 74.6 | — | |
| FYC 55 FM | SKF | Ball Bearing Units | 49.4 | — | |
| FYC 55 TF | SKF | Ball Bearing Units | 46.4 | — | |
| FYC 55 WF | SKF | Ball Bearing Units | 56.6 | — | |
| FYJ 55 TF | SKF | Ball Bearing Units | 58.4 | — | |
| FYNT 55 F | SKF | Ball Bearing Units | 73.6 | — | |
| FYNT 55 L | SKF | Ball Bearing Units | 73.6 | — | |
| HCFU211 | ANDGE | Ball Bearing Units | — | ||
| HCP211 | ANDGE | Ball Bearing Units | 63.5 | Cross-ref → | |
| HCP311 | ANDGE | Ball Bearing Units | 80 | — | |
| SAF211 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| SAP211 | ANDGE | Ball Bearing Units | 63.5 | Cross-ref → | |
| SBF211G | ANDGE | Ball Bearing Units | — | ||
| SBFL211G | ANDGE | Ball Bearing Units | 224 | — | |
| SBP211 | ANDGE | Ball Bearing Units | 63.5 | — | |
| SBP211G | ANDGE | Ball Bearing Units | 45.3 | — | |
| SNU512-610 | ANDGE | Ball Bearing Units | 30 | — | |
| SNU612 | ANDGE | Ball Bearing Units | 80 | — | |
| SY 55 FM | SKF | Ball Bearing Units | 126 | — | |
| SY 55 PF | SKF | Ball Bearing Units | 126 | — | |
| SY 55 TF | SKF | Ball Bearing Units | 126 | — | |
| SY 55 TR | SKF | Ball Bearing Units | 126 | — | |
| SY 55 WF | SKF | Ball Bearing Units | 126 | — | |
| SYJ 55 TF | SKF | Ball Bearing Units | 126 | — | |
| SYNT 55 F | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 FTF | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 FTS | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 FW | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 L | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 LTF | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 LTS | SKF | Ball Bearing Units | 137 | — | |
| SYNT 55 LW | SKF | Ball Bearing Units | 137 | — | |
| TU 55 FM | SKF | Ball Bearing Units | 146 | — | |
| TU 55 TF | SKF | Ball Bearing Units | 146 | — | |
| TUJ 55 TF | SKF | Ball Bearing Units | 146 | — | |
| UCC211 | ANDGE | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCC311 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCF211 | FAG | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCF311 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCFA211 | FAG | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCFA211 | ANDGE | Ball Bearing Units | 216 | Cross-ref → | |
| UCFB211 | ANDGE | Ball Bearing Units | 78 | Cross-ref → | |
| UCFC211 | FAG | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCFL211 | FAG | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCFL211 | ANDGE | Ball Bearing Units | 224 | Cross-ref → | |
| UCFS211 | ANDGE | Ball Bearing Units | — | ||
| UCFS311 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCFX11 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCHA211 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UCP211 | FAG | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCPX11 | ANDGE | Ball Bearing Units | 65.1 | Cross-ref → | |
| UCT211 | ANDGE | Ball Bearing Units | 55.6 | Cross-ref → | |
| UCT211 | FAG | Ball Bearing Units | 22 | Cross-ref → | |
| UCT311 | ANDGE | Ball Bearing Units | 207 | Cross-ref → | |
| UKF212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKF212 | FAG | Ball Bearing Units | Cross-ref → | ||
| UKF212+H2312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKF312+H2312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKFC212+H2312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKFL212 | FAG | Ball Bearing Units | 250 | Cross-ref → | |
| UKFL212+H2312 | ANDGE | Ball Bearing Units | 250 | Cross-ref → | |
| UKFL312+H2312 | ANDGE | Ball Bearing Units | 270 | Cross-ref → | |
| UKFS312+H2312 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKP212 | ANDGE | Ball Bearing Units | Cross-ref → | ||
| UKP212 | FAG | Ball Bearing Units | 69.8 | Cross-ref → | |
| UKP212+H2312 | ANDGE | Ball Bearing Units | 69.9 | Cross-ref → | |
| UKP312+H2312 | ANDGE | Ball Bearing Units | 85 | Cross-ref → | |
| UKT212 | FAG | Ball Bearing Units | 102 | Cross-ref → | |
| FY55TF | SKF | Ball Bearing Units | 55.6 | 164 | — |
| SY55TF | SKF | Ball Bearing Units | 55.6 | 233 | — |
| UCK211 | ANDGE | Ball Bearing Units | 55.6 | 191 | Cross-ref → |
| UKFLU212+H2312 | ANDGE | Ball Bearing Units | 62 | 235 | Cross-ref → |
| UKFU312+H2312 | ANDGE | Ball Bearing Units | 62 | 195 | Cross-ref → |
| UCPA211 | ANDGE | Ball Bearing Units | 63.5 | 140 | Cross-ref → |
| UCFU311 | ANDGE | Ball Bearing Units | 66 | 185 | Cross-ref → |
| UCK311 | ANDGE | Ball Bearing Units | 66 | 207 | Cross-ref → |
| FY55WM | SKF | Ball Bearing Units | 71.4 | 164 | — |
| NANF211 | FYH | Ball Bearing Units | 71.4 | 164 | Cross-ref → |
| THU10155 | ANDGE | Ball Bearing Units | 90 | — | |
| THU10355ABS | ANDGE | Ball Bearing Units | 90 | — | |
| THU10455 | ANDGE | Ball Bearing Units | 90 | — | |
| CSA211 | ANDGE | Ball Bearing Units | 100 | 48.4 | Cross-ref → |
| CSA211G | ANDGE | Ball Bearing Units | 100 | 48.4 | — |
| HC211 | ANDGE | Ball Bearing Units | 100 | 71.4 | Cross-ref → |
| HC211-32 | ANDGE | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| HC211-33 | ANDGE | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| NA211 | ANDGE | Ball Bearing Units | 100 | 71.4 | Cross-ref → |
| ND211 | ANDGE | Ball Bearing Units | 100 | 57.2 | — |
| RA211 | ANDGE | Ball Bearing Units | 100 | 24 | — |
| RB211 | ANDGE | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| SA211 | ANDGE | Ball Bearing Units | 100 | 32.5 | Cross-ref → |
| SA211G | ANDGE | Ball Bearing Units | 100 | 48.4 | — |
| SB211 | ANDGE | Ball Bearing Units | 100 | 45.3 | Cross-ref → |
| SB211H | ANDGE | Ball Bearing Units | 100 | 46.9 | — |
| SC211 | ANDGE | Ball Bearing Units | 100 | 21 | Cross-ref → |
| SER211 | ANDGE | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| SNV100-F-L + 1211 + DH211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 1211 + DHV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 1211 + FSV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 1211 + TSV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 20211 + DH211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 20211 + DHV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 20211 + FSV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 20211 + TSV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 2211 + DH211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 2211 + DHV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 2211 + FSV211 | FAG | Ball Bearing Units | 100 | — | |
| SNV100-F-L + 2211 + TSV211 | FAG | Ball Bearing Units | 100 | — | |
| SR2211 | ANDGE | Ball Bearing Units | 100 | 79.38 | — |
| UC211 | ANDGE | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| UC211 | FAG | Ball Bearing Units | 100 | 55.6 | Cross-ref → |
| UC211-55MM-GA | ANDGE | Ball Bearing Units | 100 | 25 | — |
| UC211-55MM-GA-D | ANDGE | Ball Bearing Units | 100 | 25 | — |
| UC211NW3/YA1 | ANDGE | Ball Bearing Units | 100 | 55.6 | — |
| UC211T | ANDGE | Ball Bearing Units | 100 | 55.6 | — |
| UE211 | ANDGE | Ball Bearing Units | 100 | 48.4 | Cross-ref → |
| UEL211 | ANDGE | Ball Bearing Units | 100 | 71.4 | Cross-ref → |
| UK211 | ANDGE | Ball Bearing Units | 100 | 39 | Cross-ref → |
| UK211+H2311 | ANDGE | Ball Bearing Units | 100 | 7.3 | Cross-ref → |
| UK211+HA2311 | ANDGE | Ball Bearing Units | 100 | 7.3 | — |
| UK211+HE2311 | ANDGE | Ball Bearing Units | 100 | 7.3 | — |
| UK211+HS2311 | ANDGE | Ball Bearing Units | 100 | 7.3 | — |
| UK211-30 | ANDGE | Ball Bearing Units | 100 | — | |
| UK211-31 | ANDGE | Ball Bearing Units | 100 | — | |
| UK211-32 | ANDGE | Ball Bearing Units | 100 | — | |
| MG55R1-14M1 | ANDGE | Ball Bearing Units | 100.3 | 28 | — |
| F512-A-L + 1212K | FAG | Ball Bearing Units | 110 | — | |
| F512-A-L + 20212K | FAG | Ball Bearing Units | 110 | — | |
| F512-B-L + 1212K | FAG | Ball Bearing Units | 110 | — | |
| F512-B-L + 20212K | FAG | Ball Bearing Units | 110 | — | |
| F512-WA-L + 2212K | FAG | Ball Bearing Units | 110 | — | |
| F512-WA-L + 22212K | FAG | Ball Bearing Units | 110 | — | |
| F512-WB-L + 2212K | FAG | Ball Bearing Units | 110 | — | |
| F512-WB-L + 22212K | FAG | Ball Bearing Units | 110 | — | |
| MG55A1-1T | ANDGE | Ball Bearing Units | 110 | 31.34 | — |
| SNV110-F-L + 1212K + H212 + DH512 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212K + H212 + DHV512 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212K + H212 + FSV512 | FAG | Ball Bearing Units | 110 | — | |
| SNV110-F-L + 1212K + H212 + TSV512 | FAG | Ball Bearing Units | 110 | — | |
| UCX11 | ANDGE | Ball Bearing Units | 110 | 65.1 | Cross-ref → |
| UCX11-55MMR-GA | ANDGE | Ball Bearing Units | 110 | 27 | — |
| UK212 | FAG | Ball Bearing Units | 110 | 40 | Cross-ref → |
| MG55A1-51T | ANDGE | Ball Bearing Units | 119.2 | 34 | — |
| HC311 | ANDGE | Ball Bearing Units | 120 | 73 | Cross-ref → |
| SC311 | ANDGE | Ball Bearing Units | 120 | 29 | — |
| UC311 | ANDGE | Ball Bearing Units | 120 | 66 | Cross-ref → |
| UCPH211 | ANDGE | Ball Bearing Units | 120 | 217 | — |
| UK311 | ANDGE | Ball Bearing Units | 120 | 43 | Cross-ref → |
| VRE311-A | FAG | Ball Bearing Units | 120 | 29 | — |
| VRE311-B | FAG | Ball Bearing Units | 120 | 29 | — |
| VRE311-C | FAG | Ball Bearing Units | 120 | 29 | — |
| VRE311-D | FAG | Ball Bearing Units | 120 | 29 | — |
| VRE311-E | FAG | Ball Bearing Units | 120 | 29 | — |
| VRE311-F | FAG | Ball Bearing Units | 120 | 29 | — |
| MG55A1-54 | ANDGE | Ball Bearing Units | 121 | 34 | — |
| MG55D2-2 | ANDGE | Ball Bearing Units | 136.8 | 47.8 | — |
| MG55A1-2T | ANDGE | Ball Bearing Units | 149 | 45 | — |
| MG55A1-3T | ANDGE | Ball Bearing Units | 149.5 | 45 | — |
| MG55A1-40 | ANDGE | Ball Bearing Units | 149.5 | 45 | — |
| SAPF211 | ANDGE | Ball Bearing Units | 167 | 138 | — |
| SALP211 | ANDGE | Ball Bearing Units | 224 | 181 | — |
| NAPK211 | ANDGE | Ball Bearing Units | 232 | 181 | Cross-ref → |
| UCPK211 | ANDGE | Ball Bearing Units | 232 | 181 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.