13 models with a 480 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 700 mm to 870 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 4096X2D/W33 | ANDGE | Angular Contact Ball Bearings | 700 | 200 | — |
| 7096 AM | SKF | Angular Contact Ball Bearings | 700 | 100 | — |
| 7096 BM | SKF | Angular Contact Ball Bearings | 700 | 100 | — |
| 7096B | ANDGE | Angular Contact Ball Bearings | 700 | 100 | — |
| 7096BF1 | ANDGE | Angular Contact Ball Bearings | 700 | 100 | — |
| QJ 1096 | ANDGE | Angular Contact Ball Bearings | 700 | 100 | — |
| QJ 1096 N2MA | SKF | Angular Contact Ball Bearings | 700 | 100 | — |
| QJ 1096N2MA | ANDGE | Angular Contact Ball Bearings | 700 | 100 | — |
| QJF 1096 | ANDGE | Angular Contact Ball Bearings | 700 | 100 | Cross-ref → |
| QJF 1096MB | ANDGE | Angular Contact Ball Bearings | 700 | 100 | — |
| QJ 1296 N2MA | SKF | Angular Contact Ball Bearings | 870 | 170 | — |
| QJ 1296N2MA | ANDGE | Angular Contact Ball Bearings | 870 | 170 | — |
| QJF 1296 | ANDGE | Angular Contact Ball Bearings | 870 | 170 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.