57 models with a 44.45 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 53.975 mm to 130 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| NAF212-36 | ANDGE | Needle Roller Bearings | — | ||
| NAF312-36 | ANDGE | Needle Roller Bearings | — | ||
| NAFL212-36 | ANDGE | Needle Roller Bearings | 250 | — | |
| NAFL312-36 | ANDGE | Needle Roller Bearings | 270 | — | |
| NAFS312-36 | ANDGE | Needle Roller Bearings | — | ||
| NAP312-36 | ANDGE | Needle Roller Bearings | 85 | — | |
| NAT212-36 | ANDGE | Needle Roller Bearings | 146 | — | |
| BA 2812Z | IKO | Needle Roller Bearings | 53.975 | 19.05 | — |
| BA 2816Z | IKO | Needle Roller Bearings | 53.975 | 25.4 | — |
| BA 2820Z | IKO | Needle Roller Bearings | 53.975 | 31.75 | — |
| BA 2824Z | IKO | Needle Roller Bearings | 53.975 | 38.1 | — |
| BAM 2812 | IKO | Needle Roller Bearings | 53.975 | 19.05 | — |
| BAM 2816 | IKO | Needle Roller Bearings | 53.975 | 25.4 | — |
| BAM 2820 | IKO | Needle Roller Bearings | 53.975 | 31.75 | — |
| BAM 2824 | IKO | Needle Roller Bearings | 53.975 | 38.1 | — |
| J-2812 | NSK | Needle Roller Bearings | 53.975 | 19.05 | — |
| J-2816 | NSK | Needle Roller Bearings | 53.975 | 25.4 | — |
| J-2824 | NSK | Needle Roller Bearings | 53.975 | 38.1 | — |
| MJ-28121 | NSK | Needle Roller Bearings | 53.975 | 19.05 | — |
| MJ-28161 | NSK | Needle Roller Bearings | 53.975 | 25.4 | — |
| MJ-28241 | NSK | Needle Roller Bearings | 53.975 | 38.1 | — |
| WJ-283412 | NSK | Needle Roller Bearings | 53.975 | 19.05 | — |
| WJ-283416 | NSK | Needle Roller Bearings | 53.975 | 25.4 | — |
| WJ-283424 | NSK | Needle Roller Bearings | 53.975 | 38.1 | — |
| YB 2816 | IKO | Needle Roller Bearings | 53.975 | 25.4 | — |
| BHA 2824Z | IKO | Needle Roller Bearings | 57.15 | 38.1 | — |
| BHAM 2824 | IKO | Needle Roller Bearings | 57.15 | 38.1 | — |
| BR 283716 | IKO | Needle Roller Bearings | 58.738 | 25.4 | — |
| BR 283720 | IKO | Needle Roller Bearings | 58.738 | 31.75 | — |
| BR 283720 U | IKO | Needle Roller Bearings | 58.738 | 31.75 | — |
| BR 283720 UU | IKO | Needle Roller Bearings | 58.738 | 31.8 | — |
| GBR 283720 | IKO | Needle Roller Bearings | 58.738 | 31.75 | — |
| GBR 283720 U | IKO | Needle Roller Bearings | 58.738 | 31.75 | — |
| GBR 283720 UU | IKO | Needle Roller Bearings | 58.738 | 31.8 | — |
| HJ-283716 | NSK | Needle Roller Bearings | 58.738 | 25.4 | — |
| HJ-283716 + IR-232816 | NSK | Needle Roller Bearings | 58.738 | 25.4 | — |
| HJ-283716 + IR-242816 | NSK | Needle Roller Bearings | 58.738 | 25.4 | — |
| HJ-283720 | NSK | Needle Roller Bearings | 58.738 | 31.75 | — |
| HJ-283720 + IR-222820 | NSK | Needle Roller Bearings | 58.738 | 31.75 | — |
| HJ-283720 + IR-232820 | NSK | Needle Roller Bearings | 58.738 | 31.75 | — |
| HJ-283720 + IR-242820 | NSK | Needle Roller Bearings | 58.738 | 31.75 | — |
| NCS 2820 | ANDGE | Needle Roller Bearings | 58.738 | 31.75 | — |
| BR 283820 | IKO | Needle Roller Bearings | 60.325 | 31.75 | — |
| GBR 283820 | IKO | Needle Roller Bearings | 60.325 | 31.75 | — |
| NTA-2840 | NSK | Needle Roller Bearings | 63.5 | 1.984 | Cross-ref → |
| 17SF28 | NSK | Needle Roller Bearings | 71.438 | 38.89 | — |
| BRI 284824 | IKO | Needle Roller Bearings | 76.2 | 38.35 | — |
| BRI 284828 | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| BRI 284828 U | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| BRI 284828 UU | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| GBRI 264828 U | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| GBRI 264828 UU | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| GBRI 284824 | IKO | Needle Roller Bearings | 76.2 | 38.35 | — |
| GBRI 284828 | IKO | Needle Roller Bearings | 76.2 | 44.7 | — |
| YCR-80 | NSK | Needle Roller Bearings | 127 | 73.02 | — |
| YCRS-80 | NSK | Needle Roller Bearings | 127 | 73.02 | — |
| NA312-36 | ANDGE | Needle Roller Bearings | 130 | 61.9 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.