14 models with a 42 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 60 mm to 78 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| RNN42V-1 | ANDGE | Cylindrical Roller Bearings | 37 | — | |
| RNN42V-2 | ANDGE | Cylindrical Roller Bearings | 37 | — | |
| GS 81108 | SKF | Cylindrical Roller Bearings | 60 | 3.5 | Cross-ref → |
| RNU 1007 ECP | SKF | Cylindrical Roller Bearings | 62 | 14 | — |
| RNU1007M | ANDGE | Cylindrical Roller Bearings | 62 | 14 | — |
| TRU 426230 | IKO | Cylindrical Roller Bearings | 62 | 30 | — |
| TRU 426230UU | IKO | Cylindrical Roller Bearings | 62 | 30 | — |
| GS 81208 | SKF | Cylindrical Roller Bearings | 68 | 5 | Cross-ref → |
| RNAST 35 | IKO | Cylindrical Roller Bearings | 72 | 19.8 | — |
| RNAST 35R | IKO | Cylindrical Roller Bearings | 72 | 19.8 | — |
| RNU 306 | SKF | Cylindrical Roller Bearings | 72 | 19 | Cross-ref → |
| RNU306 | ANDGE | Cylindrical Roller Bearings | 72 | 19 | Cross-ref → |
| RNU306M | ANDGE | Cylindrical Roller Bearings | 72 | 19 | Cross-ref → |
| GS 89308 | SKF | Cylindrical Roller Bearings | 78 | 7.5 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.