53 models with a 38.1 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 66.675 mm to 95.25 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 99R24 | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-2RS | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-2RZ | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-RS | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-RZ | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-Z | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24-ZZ | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24N | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| 99R24NR | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| R24 | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | Cross-ref → |
| R24-2RS | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| R24-2Z | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| R24-N | ANDGE | Deep Groove Ball Bearings | 66.675 | 11.11 | — |
| R24-RS | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| R24-Z | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| SSR24 | ANDGE | Deep Groove Ball Bearings | 66.675 | 11.11 | Cross-ref → |
| SSR24-2R | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.288 | — |
| SSR24-2RS | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.29 | Cross-ref → |
| SSR24-ZZ | ANDGE | Deep Groove Ball Bearings | 66.675 | 14.29 | — |
| FHR208-24-AP | ANDGE | Deep Groove Ball Bearings | 80 | 22 | — |
| FHR208-24-AP-NLC | ANDGE | Deep Groove Ball Bearings | 80 | 22 | — |
| FHR208-24-CNH | ANDGE | Deep Groove Ball Bearings | 80 | 22 | — |
| FHR208-24R | ANDGE | Deep Groove Ball Bearings | 80 | 22 | — |
| HCR208-24 | ANDGE | Deep Groove Ball Bearings | 80 | 21 | — |
| HCR208-24-TRL | ANDGE | Deep Groove Ball Bearings | 80 | 21 | — |
| HCR208-24-XX-TRL-NLC-S | ANDGE | Deep Groove Ball Bearings | 80 | 18 | — |
| SER-24 | ANDGE | Deep Groove Ball Bearings | 80 | 27.8 | — |
| SER-24-ZSFF | ANDGE | Deep Groove Ball Bearings | 80 | 27.8 | — |
| YAR 208-108-2F | SKF | Deep Groove Ball Bearings | 80 | 49.2 | — |
| YAR 208-108-2F/AH | SKF | Deep Groove Ball Bearings | 80 | 49.2 | — |
| YAR 208-108-2RF | SKF | Deep Groove Ball Bearings | 80 | 49.2 | — |
| YAR 208-108-2RF/HV | SKF | Deep Groove Ball Bearings | 80 | 49.2 | — |
| YAT 208-108 | SKF | Deep Groove Ball Bearings | 80 | 40 | — |
| YEL 208-108-2F | SKF | Deep Groove Ball Bearings | 80 | 56.3 | — |
| YEL 208-108-2FCW | SKF | Deep Groove Ball Bearings | 80 | 56.3 | — |
| YET 208-108 | SKF | Deep Groove Ball Bearings | 80 | 43.7 | — |
| RLS 12 | SKF | Deep Groove Ball Bearings | 82.55 | 19.05 | Cross-ref → |
| RLS-12 | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | Cross-ref → |
| RLS-12-2RS | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | — |
| RLS-12-2Z | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | — |
| RLS12 | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | Cross-ref → |
| RLS12-2RDC3P6QE6 | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | — |
| RLS12-2RS | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | — |
| RLS12-ZZ | ANDGE | Deep Groove Ball Bearings | 82.55 | 19.05 | — |
| YAR 209-108-2F | SKF | Deep Groove Ball Bearings | 85 | 49.2 | — |
| YAR 209-108-2F/AH | SKF | Deep Groove Ball Bearings | 85 | 49.2 | — |
| YHC 209-108-2LS8W/VT357 | SKF | Deep Groove Ball Bearings | 85 | 30 | — |
| HCR308-24-ZMKFF-SP1 | ANDGE | Deep Groove Ball Bearings | 90 | 23 | — |
| YHC 210-108-2LS8W/VT357 | SKF | Deep Groove Ball Bearings | 90 | 30 | — |
| RMS 12 | SKF | Deep Groove Ball Bearings | 95.25 | 23.813 | — |
| RMS-12 | ANDGE | Deep Groove Ball Bearings | 95.25 | 23.812 | — |
| RMS-12-2Z | ANDGE | Deep Groove Ball Bearings | 95.25 | 23.812 | — |
| RMS12 | ANDGE | Deep Groove Ball Bearings | 95.25 | 23.812 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.