29 models with a 38.1 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 44.45 mm to 65 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 14816 | SKF | Bearing Accessories | — | ||
| 14844 | SKF | Bearing Accessories | — | ||
| 14846 | SKF | Bearing Accessories | — | ||
| 14903 | SKF | Bearing Accessories | — | ||
| 15141 | SKF | Bearing Accessories | — | ||
| 15204 | SKF | Bearing Accessories | — | ||
| 15235 | SKF | Bearing Accessories | — | ||
| IR-2416 | NSK | Bearing Accessories | 44.45 | 25.78 | — |
| IR-2424 | NSK | Bearing Accessories | 44.45 | 38.48 | — |
| IR-242816 | NSK | Bearing Accessories | 44.45 | 25.4 | — |
| IR-242820 | NSK | Bearing Accessories | 44.45 | 31.75 | — |
| IRB 2412 | IKO | Bearing Accessories | 44.45 | 19.43 | — |
| IRB 2416 | IKO | Bearing Accessories | 44.45 | 25.78 | — |
| IRB 2424 | IKO | Bearing Accessories | 44.45 | 38.48 | — |
| LRB 242816 | IKO | Bearing Accessories | 44.45 | 25.65 | — |
| LRB 242820 | IKO | Bearing Accessories | 44.45 | 32 | — |
| LRBZ 242820 | IKO | Bearing Accessories | 44.45 | 32 | — |
| LRBZ 242820B | IKO | Bearing Accessories | 44.45 | 32 | — |
| HE 209 | SKF | Bearing Accessories | 45 | 33 | — |
| HE 2309 | SKF | Bearing Accessories | 45 | 50 | Cross-ref → |
| HE 309 | SKF | Bearing Accessories | 45 | 39 | Cross-ref → |
| HE 309 E | SKF | Bearing Accessories | 45 | 39 | — |
| IRB 2410-1 | IKO | Bearing Accessories | 47.63 | 16.25 | — |
| IRB 248-1 | IKO | Bearing Accessories | 47.63 | 13.08 | — |
| LRB 243020 | IKO | Bearing Accessories | 47.63 | 32 | — |
| LRBZ 243020 | IKO | Bearing Accessories | 47.63 | 32 | — |
| LRBZ 243020B | IKO | Bearing Accessories | 47.63 | 32 | — |
| IR-243220 | NSK | Bearing Accessories | 50.8 | 31.75 | — |
| H2309X108 | FAG | Bearing Accessories | 65 | 50 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.