53 models with a 360 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 440 mm to 650 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 60872 | ANDGE | Deep Groove Ball Bearings | 440 | 25 | — |
| 60872 MA | SKF | Deep Groove Ball Bearings | 440 | 25 | — |
| 61872 | ANDGE | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872 | SKF | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872 MA | SKF | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872-M | FAG | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872F3/YA6 | ANDGE | Deep Groove Ball Bearings | 440 | 38 | — |
| 61872M | ANDGE | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872M | FAG | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872MA | ANDGE | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61872MH | ANDGE | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 6872 | NSK | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 6872 | NTN | Deep Groove Ball Bearings | 440 | 38 | Cross-ref → |
| 61972 | ANDGE | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 61972 | SKF | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 61972 MA | SKF | Deep Groove Ball Bearings | 480 | 56 | — |
| 61972/P64 | ANDGE | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 61972F3 | ANDGE | Deep Groove Ball Bearings | 480 | 56 | — |
| 61972M | ANDGE | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 61972M/C3 | ANDGE | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 6972 | NTN | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| 6972 | NSK | Deep Groove Ball Bearings | 480 | 56 | Cross-ref → |
| FL-61972MA | ANDGE | Deep Groove Ball Bearings | 480 | 56 | — |
| 1000972X3/AS | ANDGE | Deep Groove Ball Bearings | 509.5 | 70 | — |
| 62972X3 | ANDGE | Deep Groove Ball Bearings | 509.5 | 70 | Cross-ref → |
| 6072X1/C9 | ANDGE | Deep Groove Ball Bearings | 530 | 82 | — |
| 16072 | SKF | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 16072 | NTN | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 16072 | ANDGE | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 16072 MA | SKF | Deep Groove Ball Bearings | 540 | 57 | — |
| 16072-M | FAG | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 16072M | ANDGE | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 16072M | FAG | Deep Groove Ball Bearings | 540 | 57 | Cross-ref → |
| 6072 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072 | NSK | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072 | NTN | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072 | SKF | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072 M | SKF | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072 M/W64 | SKF | Deep Groove Ball Bearings | 540 | 82 | — |
| 6072-M | FAG | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072/P6 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072F1 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072F3 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072M | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072M | FAG | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072MA | ANDGE | Deep Groove Ball Bearings | 540 | 82 | — |
| 6072MB | ANDGE | Deep Groove Ball Bearings | 540 | 82 | — |
| 6172 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | — |
| QJ1072 | ANDGE | Deep Groove Ball Bearings | 540 | 82 | Cross-ref → |
| 6072X3 | ANDGE | Deep Groove Ball Bearings | 549.5 | 85 | Cross-ref → |
| 6272 | NSK | Deep Groove Ball Bearings | 650 | 95 | Cross-ref → |
| 6272 | ANDGE | Deep Groove Ball Bearings | 650 | 95 | Cross-ref → |
| QJ1272 | ANDGE | Deep Groove Ball Bearings | 650 | 122 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.