52 models with a 360 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 440 mm to 650 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 71872 ACM/P5 | SKF | Angular Contact Ball Bearings | 440 | 38 | — |
| 71872AC | ANDGE | Angular Contact Ball Bearings | 440 | 38 | — |
| 4972X2D/W33 | ANDGE | Angular Contact Ball Bearings | 480 | 112 | — |
| 71972 ACDMA/HCP4A | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972 ACDMA/P4A | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972 ACMB | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972 AMB | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972 BM | SKF | Angular Contact Ball Bearings | 480 | 56 | Cross-ref → |
| 71972 CDMA/HCP4A | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972 CDMA/P4A | SKF | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972A | ANDGE | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972AC | ANDGE | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972AC/DB | ANDGE | Angular Contact Ball Bearings | 480 | 112 | — |
| 71972ACM/P5 | ANDGE | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972B | ANDGE | Angular Contact Ball Bearings | 480 | 56 | — |
| 71972BM | ANDGE | Angular Contact Ball Bearings | 480 | 56 | Cross-ref → |
| QJ 1072X1 | ANDGE | Angular Contact Ball Bearings | 539.5 | 82 | — |
| QJF 1072X1 | ANDGE | Angular Contact Ball Bearings | 539.5 | 82 | — |
| 116172H | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| 156172/W33 | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 36172H | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| 4072X2D/W33 | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 4072X2DCM | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 4072X2DM | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 7072 AGM | SKF | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072 AM | SKF | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072 BGM | SKF | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072AC | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072AC/DB | ANDGE | Angular Contact Ball Bearings | 540 | 164 | Cross-ref → |
| 7072AC/DF | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 7072B | ANDGE | Angular Contact Ball Bearings | 540 | 82 | Cross-ref → |
| 7072B/DB | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 7072B/DF | ANDGE | Angular Contact Ball Bearings | 540 | 164 | — |
| 7072BM | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072C | ANDGE | Angular Contact Ball Bearings | 540 | 82 | Cross-ref → |
| 7072CF3 | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| 7072CM | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJ 1072 | ANDGE | Angular Contact Ball Bearings | 540 | 82 | Cross-ref → |
| QJ 1072 N2MA | SKF | Angular Contact Ball Bearings | 540 | 82 | — |
| QJ 1072M | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJ 1072N2MA | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJ1072M | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJF 1072 | ANDGE | Angular Contact Ball Bearings | 540 | 82 | Cross-ref → |
| QJF 1072M | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJF 1072MB | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJF1072M | ANDGE | Angular Contact Ball Bearings | 540 | 82 | — |
| QJF 1072X3 | ANDGE | Angular Contact Ball Bearings | 549.5 | 85 | — |
| 7272 BM | SKF | Angular Contact Ball Bearings | 650 | 95 | — |
| 7272B | ANDGE | Angular Contact Ball Bearings | 650 | 95 | Cross-ref → |
| 7272BF1 | ANDGE | Angular Contact Ball Bearings | 650 | 95 | — |
| QJ 1272 N2MA | SKF | Angular Contact Ball Bearings | 650 | 122 | — |
| QJ 1272N2MA | ANDGE | Angular Contact Ball Bearings | 650 | 122 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.