15 models with a 270 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 292 mm to 600 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 270X310X16 HDS1 R | SKF | Custom & Special Bearings | — | ||
| 270X310X20 HS8 R1 | SKF | Custom & Special Bearings | — | ||
| 270X335X18 HDS1 R | SKF | Custom & Special Bearings | — | ||
| AN48 | NSK | Custom & Special Bearings | 34 | Cross-ref → | |
| ANL48 | NSK | Custom & Special Bearings | 34 | Cross-ref → | |
| HN48 | NSK | Custom & Special Bearings | 34 | Cross-ref → | |
| LFC 5274220E/C4YA4 | ANDGE | Custom & Special Bearings | 292 | 220 | — |
| FC5476230/P6 | ANDGE | Custom & Special Bearings | 380 | 230 | — |
| VU140325 | INA | Custom & Special Bearings | 380 | 5 | — |
| FCD 5478280R | ANDGE | Custom & Special Bearings | 390 | 280 | — |
| QJ1154 | ANDGE | Custom & Special Bearings | 399.5 | 60 | — |
| E-CRO-5403 | NTN | Custom & Special Bearings | 410 | 222 | — |
| 91754E | ANDGE | Custom & Special Bearings | 550 | 1300 | — |
| 1-801 | ANDGE | Custom & Special Bearings | 600 | 140 | — |
| 88954 | ANDGE | Custom & Special Bearings | 600 | 140 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.