32 models with a 25.4 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 31.75 mm to 45 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 10035 | SKF | Bearing Accessories | — | ||
| 10058 | SKF | Bearing Accessories | — | ||
| 10114 | SKF | Bearing Accessories | — | ||
| 10123 | SKF | Bearing Accessories | — | ||
| 544257 | SKF | Bearing Accessories | — | ||
| 550074 | SKF | Bearing Accessories | — | ||
| 9814 | SKF | Bearing Accessories | — | ||
| 9826 | SKF | Bearing Accessories | — | ||
| 9831 | SKF | Bearing Accessories | — | ||
| 9847 | SKF | Bearing Accessories | — | ||
| 9876 | SKF | Bearing Accessories | — | ||
| 9903 | SKF | Bearing Accessories | — | ||
| 9967 | SKF | Bearing Accessories | — | ||
| IR-1612 | NSK | Bearing Accessories | 31.75 | 19.42 | — |
| IR-1616 | NSK | Bearing Accessories | 31.75 | 25.78 | — |
| IR-162016 | NSK | Bearing Accessories | 31.75 | 25.4 | — |
| IR-162020 | NSK | Bearing Accessories | 31.75 | 31.75 | — |
| IRB 1610 | IKO | Bearing Accessories | 31.75 | 16.25 | — |
| IRB 1612 | IKO | Bearing Accessories | 31.75 | 19.43 | — |
| IRB 1616 | IKO | Bearing Accessories | 31.75 | 25.78 | — |
| IRB 1620 | IKO | Bearing Accessories | 31.75 | 32.13 | — |
| IRB 168 | IKO | Bearing Accessories | 31.75 | 13.08 | — |
| LRB 162016 | IKO | Bearing Accessories | 31.75 | 25.65 | — |
| LRB 162020 | IKO | Bearing Accessories | 31.75 | 32 | — |
| LRBZ 162016 | IKO | Bearing Accessories | 31.75 | 25.65 | — |
| LRBZ 162020 | IKO | Bearing Accessories | 31.75 | 32 | — |
| LRBZ 162020B | IKO | Bearing Accessories | 31.75 | 32 | — |
| IRB 1610-1 | IKO | Bearing Accessories | 33.34 | 16.25 | — |
| IRB 1612-1 | IKO | Bearing Accessories | 33.34 | 19.43 | — |
| IRB 168-1 | IKO | Bearing Accessories | 33.34 | 13.08 | — |
| HE2306 | ANDGE | Bearing Accessories | 38 | 45 | Cross-ref → |
| H2306X100 | FAG | Bearing Accessories | 45 | 38 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.