39 models with a 23.813 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 52 mm to 52 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| F 15/16 FM | SKF | Ball Bearing Units | 25.6 | — | |
| FT 15/16 FM | SKF | Ball Bearing Units | 25.6 | — | |
| FY 15/16 FM | SKF | Ball Bearing Units | 42.5 | — | |
| FY 15/16 RM | SKF | Ball Bearing Units | — | ||
| FY 15/16 TF | SKF | Ball Bearing Units | — | ||
| FY 15/16 TF/AH | SKF | Ball Bearing Units | — | ||
| FY 15/16 WF | SKF | Ball Bearing Units | 45.9 | — | |
| FYT 15/16 FM | SKF | Ball Bearing Units | 42.5 | — | |
| FYT 15/16 RM | SKF | Ball Bearing Units | — | ||
| FYT 15/16 TF | SKF | Ball Bearing Units | — | ||
| FYT 15/16 WF | SKF | Ball Bearing Units | 45.9 | — | |
| PF 15/16 FM | SKF | Ball Bearing Units | 25.5 | — | |
| PF 15/16 RM | SKF | Ball Bearing Units | 21.8 | — | |
| PF 15/16 TF | SKF | Ball Bearing Units | 21.8 | — | |
| PF 15/16 WF | SKF | Ball Bearing Units | 28.9 | — | |
| PFD 15/16 FM | SKF | Ball Bearing Units | 25.5 | — | |
| PFD 15/16 RM | SKF | Ball Bearing Units | 21.8 | — | |
| PFD 15/16 TF | SKF | Ball Bearing Units | 21.8 | — | |
| PFD 15/16 WF | SKF | Ball Bearing Units | 28.9 | — | |
| PFT 15/16 FM | SKF | Ball Bearing Units | 25.5 | — | |
| PFT 15/16 RM | SKF | Ball Bearing Units | 21.8 | — | |
| PFT 15/16 TF | SKF | Ball Bearing Units | 21.8 | — | |
| PFT 15/16 WF | SKF | Ball Bearing Units | 28.9 | — | |
| SY 15/16 FM | SKF | Ball Bearing Units | 70 | — | |
| SY 15/16 RM | SKF | Ball Bearing Units | 70 | — | |
| SY 15/16 TF | SKF | Ball Bearing Units | 70 | — | |
| SY 15/16 TF/AH | SKF | Ball Bearing Units | 70 | — | |
| SY 15/16 WF | SKF | Ball Bearing Units | 70 | — | |
| SYH 15/16 FM | SKF | Ball Bearing Units | 66.9 | — | |
| SYH 15/16 RM | SKF | Ball Bearing Units | 66.9 | — | |
| SYH 15/16 TF | SKF | Ball Bearing Units | 66.9 | — | |
| SYH 15/16 TF/AH | SKF | Ball Bearing Units | 70 | — | |
| SYH 15/16 WF | SKF | Ball Bearing Units | 66.9 | — | |
| TU 15/16 FM | SKF | Ball Bearing Units | 91 | — | |
| TU 15/16 TF | SKF | Ball Bearing Units | 91 | — | |
| TU 15/16 WF | SKF | Ball Bearing Units | 91 | — | |
| NA205-15 | ANDGE | Ball Bearing Units | 52 | 44.4 | Cross-ref → |
| SB205-15 | ANDGE | Ball Bearing Units | 52 | 27 | Cross-ref → |
| SER205-15 | ANDGE | Ball Bearing Units | 52 | 34.9 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.