12 models with a 210 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 215 mm to 458.1 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 210X240X15 HMS5 RG | SKF | Custom & Special Bearings | — | ||
| 210X240X15 HMS5 V | SKF | Custom & Special Bearings | — | ||
| 210X240X15 HMSA10 V | SKF | Custom & Special Bearings | — | ||
| 210X245X16 HDS1 R | SKF | Custom & Special Bearings | — | ||
| PCM 210215100 B | SKF | Custom & Special Bearings | 215 | 100 | — |
| PCM 210215100 E | SKF | Custom & Special Bearings | 215 | 100 | — |
| PCM 210215100 M | SKF | Custom & Special Bearings | 215 | 100 | — |
| K210X220X42 | INA | Custom & Special Bearings | 220 | 42 | — |
| K210x220x42 | NTN | Custom & Special Bearings | 220 | 42 | — |
| 30642N1-WTL | ANDGE | Custom & Special Bearings | 285 | 41 | — |
| 210TDO300-1 | ANDGE | Custom & Special Bearings | 300 | — | |
| 91742X2J | ANDGE | Custom & Special Bearings | 458.1 | 122 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.