29 models with a 21 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 25 mm to 29 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| FWF-212513 | NSK | Needle Roller Bearings | 25 | 13 | — |
| K 21x25x13 | SKF | Needle Roller Bearings | 25 | 13 | Cross-ref → |
| K21×25×13 | ANDGE | Needle Roller Bearings | 25 | 13 | — |
| K21×25×17 | ANDGE | Needle Roller Bearings | 25 | 17 | — |
| KT 212610 | IKO | Needle Roller Bearings | 26 | 10 | — |
| KT 212611 | IKO | Needle Roller Bearings | 26 | 11 | — |
| DS 21294 | IKO | Needle Roller Bearings | 29 | 4 | — |
| HMK2116 | NTN | Needle Roller Bearings | 29 | 16 | — |
| HMK2120 | NTN | Needle Roller Bearings | 29 | 20 | — |
| LM2116 | NSK | Needle Roller Bearings | 29 | 16 | — |
| LM2120 | NSK | Needle Roller Bearings | 29 | 20 | — |
| NK 21/16 | ANDGE | Needle Roller Bearings | 29 | 16 | Cross-ref → |
| NK 21/20 | SKF | Needle Roller Bearings | 29 | 20 | Cross-ref → |
| NK 21/20 | ANDGE | Needle Roller Bearings | 29 | 20 | Cross-ref → |
| NK21/16 | INA | Needle Roller Bearings | 29 | 16 | Cross-ref → |
| NK21/16R | NTN | Needle Roller Bearings | 29 | 16 | — |
| NK21/20 | INA | Needle Roller Bearings | 29 | 20 | Cross-ref → |
| NK21/20R | NTN | Needle Roller Bearings | 29 | 20 | — |
| OS 21294 | IKO | Needle Roller Bearings | 29 | 4 | — |
| RLM2116 | NSK | Needle Roller Bearings | 29 | 16 | — |
| RLM2120 | NSK | Needle Roller Bearings | 29 | 20 | — |
| TA 2116Z | IKO | Needle Roller Bearings | 29 | 16 | — |
| TA 2120Z | IKO | Needle Roller Bearings | 29 | 20 | — |
| TAF 212916 | IKO | Needle Roller Bearings | 29 | 16 | — |
| TAF 212920 | IKO | Needle Roller Bearings | 29 | 20 | — |
| TAM 2116 | IKO | Needle Roller Bearings | 29 | 16 | — |
| TAM 2120 | IKO | Needle Roller Bearings | 29 | 20 | — |
| YT 2116 | IKO | Needle Roller Bearings | 29 | 16 | — |
| YT 2120 | IKO | Needle Roller Bearings | 29 | 20 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.