23 models with a 1250 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 1500 mm to 1800 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| 248/1250CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1500 | 250 | — |
| 239/1250CA/W33 | ANDGE | Self-Aligning Roller Bearings | 1630 | 280 | — |
| 239/1250CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1630 | 280 | — |
| 239/1250CAW33 | ANDGE | Self-Aligning Roller Bearings | 1630 | 280 | — |
| 249/1250CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1630 | 375 | — |
| 230/1250 CAF/W33 | SKF | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250 CAKF/W33 | SKF | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250CAF/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250CAF1D/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 560 | — |
| 230/1250CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250CAK/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250CAKF/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 230/1250D | ANDGE | Self-Aligning Roller Bearings | 1750 | 560 | — |
| 230/1250X2CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 370 | — |
| 240/1250CA/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 500 | — |
| 240/1250CAE4 | NSK | Self-Aligning Roller Bearings | 1750 | 500 | — |
| 240/1250CAF3/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 500 | — |
| 240/1250CAK30E4 | NSK | Self-Aligning Roller Bearings | 1750 | 500 | — |
| 321422 A | SKF | Self-Aligning Roller Bearings | 1750 | 560 | — |
| C 30/1250 KMB | SKF | Self-Aligning Roller Bearings | 1750 | 375 | — |
| C 30/1250 MB | SKF | Self-Aligning Roller Bearings | 1750 | 375 | — |
| Series 230/1250CA/W33 | ANDGE | Self-Aligning Roller Bearings | 1750 | 375 | — |
| 293/1250 EF | SKF | Self-Aligning Roller Bearings | 1800 | 330 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.