Global Shipping · OEM & Custom Bearings Welcome
Home › Search by Bore › 11.112 mm › Needle Roller Bearings

11.112 mm Bore Needle Roller Bearings — All Models

37 models with a 11.112 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 15.875 mm to 41.275 mm.

ModelBrandTypeOD D (mm)Width B (mm)
BA 710ZIKONeedle Roller Bearings15.87515.88—
BA 76ZIKONeedle Roller Bearings15.8759.52—
BA 77ZIKONeedle Roller Bearings15.87511.13—
BA 78ZIKONeedle Roller Bearings15.87512.7—
BAM 710IKONeedle Roller Bearings15.87515.88—
BAM 76IKONeedle Roller Bearings15.8759.52—
BAM 77IKONeedle Roller Bearings15.87511.13—
BAM 78IKONeedle Roller Bearings15.87512.7—
J-78NSKNeedle Roller Bearings15.87512.7—
MJ-781NSKNeedle Roller Bearings15.87512.7—
SCE78/YAANDGENeedle Roller Bearings15.87512.7—
YB 78IKONeedle Roller Bearings15.87512.7—
BHA 78ZIKONeedle Roller Bearings17.46212.7—
BHAM 78IKONeedle Roller Bearings17.46212.7—
JH-78NSKNeedle Roller Bearings17.46212.7—
MJH-781NSKNeedle Roller Bearings17.46212.7—
YBH 78IKONeedle Roller Bearings17.46212.7—
CR-16NSKNeedle Roller Bearings25.415.88—
CRB-16NSKNeedle Roller Bearings25.415.88—
CRBE-16NSKNeedle Roller Bearings25.415.88—
CRE-16NSKNeedle Roller Bearings25.415.88—
CRS-16NSKNeedle Roller Bearings25.415.88—
CRSB-16NSKNeedle Roller Bearings25.415.88—
CRSBE-16NSKNeedle Roller Bearings25.415.88—
CRSE-16NSKNeedle Roller Bearings25.415.88—
CR-18NSKNeedle Roller Bearings28.57515.88—
CRB-18NSKNeedle Roller Bearings28.57515.88—
CRBE-18NSKNeedle Roller Bearings28.57515.88—
CRE-18NSKNeedle Roller Bearings28.57515.88—
CRS-18NSKNeedle Roller Bearings28.57515.88—
CRSB-18NSKNeedle Roller Bearings28.57515.88—
CRSBE-18NSKNeedle Roller Bearings28.57515.88—
CRSE-18NSKNeedle Roller Bearings28.57515.88—
YCR-24NSKNeedle Roller Bearings38.123.81—
YCRS-24NSKNeedle Roller Bearings38.123.81—
YCR-26NSKNeedle Roller Bearings41.27523.81—
YCRS-26NSKNeedle Roller Bearings41.27523.81—

Choosing by bore

The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.