12 models with a 105 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 110 mm to 160 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| PCM 105110115 B | SKF | Spherical Plain Bearings | 110 | 115 | — |
| PCM 105110115 E | SKF | Spherical Plain Bearings | 110 | 115 | — |
| PCM 105110115 M | SKF | Spherical Plain Bearings | 110 | 115 | — |
| PCM 10511060 B | SKF | Spherical Plain Bearings | 110 | 60 | — |
| PCM 10511060 E | SKF | Spherical Plain Bearings | 110 | 60 | — |
| PCM 10511060 M | SKF | Spherical Plain Bearings | 110 | 60 | — |
| PWM 105120100 | SKF | Spherical Plain Bearings | 120 | 100 | — |
| PWM 105120120 | SKF | Spherical Plain Bearings | 120 | 120 | — |
| PWM 10512080 | SKF | Spherical Plain Bearings | 120 | 80 | — |
| GA105T | ANDGE | Spherical Plain Bearings | 160 | 35 | — |
| GAC105S | ANDGE | Spherical Plain Bearings | 160 | 35 | Cross-ref → |
| GAC105T | ANDGE | Spherical Plain Bearings | 160 | 35 | Cross-ref → |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.