22 models with a 101.6 mm bore in this type, with outer diameter and width. Outer diameters on this page run from 106.362 mm to 177.8 mm.
| Model | Brand | Type | OD D (mm) | Width B (mm) | |
|---|---|---|---|---|---|
| PCZ 6448 B | SKF | Spherical Plain Bearings | 106.362 | 76.2 | — |
| PCZ 6448 M | SKF | Spherical Plain Bearings | 106.362 | 76.2 | — |
| PCZ 6460 B | SKF | Spherical Plain Bearings | 106.362 | 95.25 | — |
| PCZ 6460 M | SKF | Spherical Plain Bearings | 106.362 | 95.25 | — |
| PCZ 6476 B | SKF | Spherical Plain Bearings | 106.362 | 120.65 | — |
| PCZ 6476 M | SKF | Spherical Plain Bearings | 106.362 | 120.65 | — |
| GACZ101S | ANDGE | Spherical Plain Bearings | 158.75 | 58.42 | Cross-ref → |
| GEWZ101ES | ANDGE | Spherical Plain Bearings | 158.75 | 152.4 | Cross-ref → |
| GEWZ101ES-2RS | ANDGE | Spherical Plain Bearings | 158.75 | 152.4 | Cross-ref → |
| GEZ 400 ES | SKF | Spherical Plain Bearings | 158.75 | 88.9 | — |
| GEZ 400 ES-2RS | SKF | Spherical Plain Bearings | 158.75 | 88.9 | — |
| GEZ 400 TXA-2LS | SKF | Spherical Plain Bearings | 158.75 | 88.9 | — |
| GEZ101ES | ANDGE | Spherical Plain Bearings | 158.75 | 88.9 | Cross-ref → |
| GEZ101ES-2RS | ANDGE | Spherical Plain Bearings | 158.75 | 88.9 | Cross-ref → |
| GEZ101ET-2RS | ANDGE | Spherical Plain Bearings | 158.75 | 88.9 | Cross-ref → |
| GEZM 400 ES | SKF | Spherical Plain Bearings | 158.75 | 152.4 | — |
| GEZM 400 ES-2RS | SKF | Spherical Plain Bearings | 158.75 | 152.4 | — |
| SBB 64 | IKO | Spherical Plain Bearings | 158.75 | 88.9 | — |
| SBB 64-2RS | IKO | Spherical Plain Bearings | 158.75 | 88.9 | — |
| GEGZ101ES | ANDGE | Spherical Plain Bearings | 177.8 | 107.315 | Cross-ref → |
| GEGZ101ES-2RS | ANDGE | Spherical Plain Bearings | 177.8 | 107.315 | Cross-ref → |
| GEGZ101HS/K | ANDGE | Spherical Plain Bearings | 177.8 | 107.315 | — |
The bore is the shaft diameter, so it is the one dimension you cannot change: pick the bore first, then decide the type from the load and speed, then the outer diameter from the housing you have. If the housing is fixed, filter by outer diameter in the product center. For fits and shaft tolerances see the fit recommendations.