QAAPX18A085S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPKT13K204S
Ball Bearing Units · Dimensions on request
Series 10.00 Kg22.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPKT13K204S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10.00 Kg22.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.00 Kg22.00 lb |
| Catalogue Ref. | j6P6ut4H3Y |
| Adapter Sleeve Axial Movement Max | 0.6 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.5 mm0.018 in |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 46400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 76.2 mm3.00 in |
| Dimension B | 153.7 mm6.05 in |
| Dimension C | 85.1 mm3.35 in |
| Dimension D Max | 223.0 mmSeries 8.78 in |
| Dimension D Min | 194.6 mm7.66 in |
| Dimension F | 285.Series 8 mm11.25 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | Series 20 mm0.750 in |
| Dimension L | 76.5 mm3.01 in |
| Dimension S | 65 mm2.56 in |
| Dimension Series G | 73.70 mm2.900 in |
| Dimension Series M | 39.6 mm1.56 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | TAPKT13K204ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - Series M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - Series M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450308625 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
NAU4LKATBYM207-20
📏 Dimensions on request
NAU4LKSF207-20
📏 Dimensions on request
SNT 513-611 - 22311K - TA611/ 2
📏 Dimensions on request
HSM125BXHFRSS
📏 Dimensions on request
MSM140BRHFKPS
📏 Dimensions on request
TCJT 1 7/8
📏 Dimensions on request
FSNT 522-619 - 23222 - VR222
📏 Dimensions on request
QMCW30J515S
📏 Dimensions on request
QMPX22J115S
📏 Dimensions on request
TAMC15K208S
📏 Dimensions on request
QMFX15J211S
📏 Dimensions on request
SNT 515-612 - 22215K - LO515/ 2-1/2
📏 Dimensions on request
E-P4B-TRB-3 1/4-ECO/ECC
📏 Dimensions on request