HSE612BRHFHTPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-3 1/4-ECO/ECC
Ball Bearing Units · Dimensions on request
46.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-3 1/4-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 46.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 46.0 lb |
| Catalogue Ref. | jAKDJs1H5Z |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 4-1/2 in |
| Dimension Ac | 7 in |
| Dimension B | 5 in |
| Dimension H | 3-3/4 in |
| Dimension H1 | 2-1/4 in |
| Dimension H2 | 7-1/2 in |
| Dimension J Max. | 11-1/4 in |
| Dimension J Min. | 10-3/4 in |
| Dimension L | 13-1/2 in |
| Dimension N | 15/16 in |
| Dimension N1 | 1-3/16 in |
| Dimension N2 | 2-3/8 in |
| Dimension d1 | 5-17/32 in |
| Dimension d2 | 6.7 in |
| K Factor | 1.19 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 3.25 in |
| Shaft Size Type | Imperial |
| Type E Closed Cover Number | EUC-H |
| Type E Open Cover Number | EUDR-3 1/4 |
| UPC Code | 0883450505949 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
QVVPA20V085S
📏 Dimensions on request
HSE615BRHFKPS
📏 Dimensions on request
QVPA17V212S
📏 Dimensions on request
LSE315BXHF
📏 Dimensions on request
1008KRR
📏 Dimensions on request
SAF 22620 3-1/2
📏 Dimensions on request
S-UKFC210D1;H2310X
📏 Dimensions on request
E-TU-TRB-45MM-ECO/ECO
📏 Dimensions on request
QAFY11A055S
📏 Dimensions on request
LSM50BRHF
📏 Dimensions on request
SNT 513-611 - 22311K - VR611
📏 Dimensions on request
UKFC206D1;H2306X
📏 Dimensions on request
RAK 17
📏 Dimensions on request