QVMC17V070S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN SNT 511-609 - 22211K - TA511
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN SNT 511-609 - 22211K - TA511 is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | mtBcCI999u |
| A | 95.00 mm |
| A1 | 70 mm |
| A3 | 155 mm |
| Alternate Part Name | SNT511-609 - 22211K - TA511 |
| Bearing | 22211K |
| Bolt Qty | 2 |
| C0 Static Load Rating | 142 |
| C1 Dynamic Load Rating | 140 |
| Cage Type | EJ |
| G | M16 |
| H | 128 mm |
| H1 | 70.0 mm |
| H2 | 28.00 mm |
| Housing | SNT 511-609 |
| Housing Mass | 4.5 Kg |
| J | 210.00 mm |
| Jmax | 215 mm |
| Jmin | 205 mm |
| L | 255 mm |
| Locating Rings (width x OD) | SR100X9.5 |
| Locknut | KM11 |
| Lockwasher | MB11 |
| Material | Cast Iron |
| Max Grease Speed | 4700 |
| Max Oil Speed | 5800 |
| N | 18 mm |
| N1 | 24.00 mm |
| Seal | TA511 |
| Seal Type | Taconite |
| Shaft Diameter d | 50 mm |
| UPC Code | 999999999 |
UKFX05D1;H2305X
📏 Dimensions on request
E-TTU-TRB-2 3/4-ECO
📏 Dimensions on request
TAFB22K400S
📏 Dimensions on request
SUCPLFL206-19/F
📏 Dimensions on request
E-P2B-TRB-70MM-ECC
📏 Dimensions on request
QVP19V085S
📏 Dimensions on request
MSE304BRHFKPS
📏 Dimensions on request
SDAF 22224
📏 Dimensions on request
MSE608BXHFKPS
📏 Dimensions on request
SR 62x7
📏 Dimensions on request
NAU4LKPLFL205-15
📏 Dimensions on request
SAK 1 1/8
📏 Dimensions on request
SCJ2
📏 Dimensions on request