QVP19V085S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-70MM-ECC
Ball Bearing Units · Dimensions on request
28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-70MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 28 lb |
| Catalogue Ref. | mvGbF49Ea6 |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 61200 lb |
| Dimension A | 3 in |
| Dimension Ac | 4.2 in |
| Dimension B | 4-1/2 in |
| Dimension H | 3-1/Series 8 in |
| Dimension H1 | 1-7/Series 8 in |
| Dimension H2 | 6-1/4 in |
| Dimension J Max. | Series 9-11/16 in |
| Dimension J Min. | Series 9-Series 5/16 in |
| Dimension L | Series 12 in |
| Dimension N | 27/Series 32 in |
| Dimension N1 | 1 in |
| Dimension d1 | 4-Series 23/Series 32 in |
| Dimension d2 | 5.65 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 70 mm2.756 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-Series G |
| UPC Code | 0883450504157 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
MSE304BRHFKPS
📏 Dimensions on request
SDAF 22224
📏 Dimensions on request
MSE608BXHFKPS
📏 Dimensions on request
SR 62x7
📏 Dimensions on request
NAU4LKPLFL205-15
📏 Dimensions on request
SAK 1 1/8
📏 Dimensions on request
SCJ2
📏 Dimensions on request
QVPL12V055S
📏 Dimensions on request
QMPL20J400S
📏 Dimensions on request
DVC13K060S
📏 Dimensions on request
YAK 3/4 SGT
📏 Dimensions on request
69790407576
📏 Dimensions on request
RSAO 3 15/16
📏 Dimensions on request