RMWE09A-RB/79x../28
📏 10 mm
Product Photo
INACustom & Special Bearings
INA RMWE09A-RB/99x../12
Custom & Special Bearings · 10 mm
10Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA RMWE09A-RB/99x../12 is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 10 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 10 mm |
| Catalogue Ref. | v5brPg8y8K |
| 1) | Locating surface |
| 2) | Marking |
| 3) | Stroke |
| A | Series 20 mm |
| A1 | 5.5 mm |
| A2 | 15 mm |
| C | 7500 N |
| C0 | 15200 N |
| C1 | 99 mm |
| C1 max | 300 mm |
| C2 | Series 10 mm |
| C4 | Series 20 mm |
| C6 | 9.5 mm |
| C7 | 4.5 mm |
| CSeries 5 | 9.5 mm |
| CSeries 8 | 3.5 mm |
| CSeries 9 | Series 20 mm |
| H | Series 10 mm |
| H1 | 1.95 mm |
| HSeries 5 | 3 mm |
| K1 | M3 According to DIN 912-12.9 Screw of; MaximumLocking torque: 2,2 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 1 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, Then suitable units for special applications must be provided. |
| K2 | M3 According to DIN 912-12.9 Screw of; MaximumLocking torque: 2,2 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 1 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, Then suitable units for special applications must be provided. |
| L | Standard guideway length: L = 59 mm, m S = 21 g L = 99 mm, m S = 36 g L = 159 mm, m S = 58 g L = 199 mm, m S = 72 g L = 219 mm, m S = 80 g L = 299 mm, m S = 108 g Upon agreement, Special lengths also available. |
| Lk | 91.9 mm |
| Lmax | 360 mm |
| Series M0x | 58 Nm |
| Series M0y | 242 Nm |
| Series M0z | 242 Nm |
| a | Series 9 mm |
| a3 | 2.5 mm |
| h | 6.2 mm |
| h1 | 2.6 mm |
| hx | Series 12 mm |
| mS | Mass of guideway: L = 59 mm, m S = 21 g L = 99 mm, m S = 36 g L = 159 mm, m S = 58 g L = 199 mm, m S = 72 g L = 219 mm, m S = 80 g L = 299 mm, m S = 108 g Upon agreement, Special lengths also available. |
| mW | 75 g |
TZ3513
📏 10.5 mm
TZ4514
📏 11 mm
55RTZ4516
📏 11 mm
TZ4014
📏 11 mm
59RTZ5016
📏 11 mm
50RTZ4016
📏 11 mm
TZ5014
📏 11 mm
LTE08-A
📏 11.5 mm
LTE08-B
📏 11.5 mm
KWEM05-C
📏 12 mm
TZ4518
📏 12 mm
UFK6412
📏 12 mm
54RTZ4518
📏 12 mm