RMWE07-RB/95x../30
📏 8 mm
Product Photo
INACustom & Special Bearings
INA RMWE07-RB/47x../18
Custom & Special Bearings · 8 mm
8Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA RMWE07-RB/47x../18 is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 8 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 8 mm |
| Catalogue Ref. | 4dIIBCdUfm |
| 1) | Locating surface |
| 2) | Marking |
| 3) | Stroke |
| A | 17 mm |
| A1 | Series 5 mm |
| A2 | Series 12 mm |
| C | 2230 N |
| C0 | 3750 N |
| C1 | 47 mm |
| C1 max | 200 mm |
| C2 | Series 8 mm |
| C4 | 15 mm |
| C6 | 7 mm |
| C7 | 3.5 mm |
| CSeries 5 | 7 mm |
| CSeries 8 | 3 mm |
| CSeries 9 | 16 mm |
| H | Series 8 mm |
| H1 | 1.5 mm |
| HSeries 5 | 2.5 mm |
| K1 | M2 According to DIN 912-12.9 Screw of; MaximumLocking torque: 0,6 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 0,2 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, ThenSuitable units for special applications must be provided. |
| K2 | M2 According to DIN 912-12.9 Screw of; MaximumLocking torque: 0,6 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 0,2 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, ThenSuitable units for special applications must be provided. |
| L | Standard guideway length: L = Series 44 mm, m S = Series 9 g L = 89 mm, m S = Series 19 g L = 104 mm, m S = Series 23 g L = 119 mm, m S = 26 g L = 134 mm, m S = 30 g L = 164 mm, m S = 35 g L = 209 mm, m S = Series 44 g Upon agreement, Special lengths also available. |
| Lk | 36.9 mm |
| Lmax | 250 mm |
| Series M0x | Series 12 Nm |
| Series M0y | 25 Nm |
| Series M0z | 25 Nm |
| a | 7 mm |
| a3 | 2.5 mm |
| h | 4.9 mm |
| h1 | 1.7 mm |
| hx | 18 mm |
| mS | Mass of guideway: L = Series 44 mm, m S = Series 9 g L = 89 mm, m S = Series 19 g L = 104 mm, m S = Series 23 g L = 119 mm, m S = 26 g L = 134 mm, m S = 30 g L = 164 mm, m S = 35 g L = 209 mm, m S = Series 44 g Upon agreement, Special lengths also available. |
| mW | 25 g |
RMWE07-RB/95x../66
📏 8 mm
RMWE07-RB/95x../54
📏 8 mm
RMWE07-RB/63x../38
📏 8 mm
RMWE07-RB/95x../78
📏 8 mm
RMWE07-RB/23x../6
📏 8 mm
RMWE07-RB/47x../6
📏 8 mm
RMWE07-RB/47x../30
📏 8 mm
RMWE07-RB/95x../6
📏 8 mm
RMWE07-RB/23x../18
📏 8 mm
RMWE07-RB/95x../42
📏 8 mm
RMWE07-RB/63x../26
📏 8 mm
RMWE07-RB/63x../14
📏 8 mm
RMWE07-RB/95x../18
📏 8 mm