RMWE07-RB/95x../78
📏 8 mm
Product Photo
INACustom & Special Bearings
INA RMWE07-RB/63x../38
Custom & Special Bearings · 8 mm
8Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA RMWE07-RB/63x../38 is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 8 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 8 mm |
| Catalogue Ref. | 9pFbn0bNcK |
| 1) | Locating surface |
| 2) | Marking |
| 3) | Stroke |
| A | 17 mm |
| A1 | Series 5 mm |
| A2 | Series 12 mm |
| C | 2500 N |
| C0 | 4350 N |
| C1 | Series 63 mm |
| C1 max | 200 mm |
| C2 | Series 8 mm |
| C4 | 15 mm |
| C6 | 7 mm |
| C7 | 3.5 mm |
| CSeries 5 | 7 mm |
| CSeries 8 | 3 mm |
| CSeries 9 | 16 mm |
| H | Series 8 mm |
| H1 | 1.5 mm |
| HSeries 5 | 2.5 mm |
| K1 | M2 According to DIN 912-12.9 Screw of; MaximumLocking torque: 0,6 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 0,2 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, Then suitable units for special applications must be provided. |
| K2 | M2 According to DIN 912-12.9 Screw of; MaximumLocking torque: 0,6 Nm According to DIN 912-12.9 Screw of, Corrosion resistant design; MaximumLocking torque: 0,2 Nm Attention:Stainless steel can still be surface treated for corrosion protection, And different forms of local treatment. If higher corrosion resistance is required, Then suitable units for special applications must be provided. |
| L | Standard guideway length: L = Series 44 mm, m S = Series 9 g L = 89 mm, m S = Series 19 g L = 104 mm, m S = Series 23 g L = 119 mm, m S = 26 g L = 134 mm, m S = 30 g L = 164 mm, m S = 35 g L = 209 mm, m S = Series 44 g Upon agreement, Special lengths also available. |
| Lk | 42.9 mm |
| Lmax | 250 mm |
| Series M0x | 14 Nm |
| Series M0y | 34 Nm |
| Series M0z | 34 Nm |
| a | 7 mm |
| a3 | 2.5 mm |
| h | 4.9 mm |
| h1 | 1.7 mm |
| hx | 38 mm |
| mS | Mass of guideway: L = Series 44 mm, m S = Series 9 g L = 89 mm, m S = Series 19 g L = 104 mm, m S = Series 23 g L = 119 mm, m S = 26 g L = 134 mm, m S = 30 g L = 164 mm, m S = 35 g L = 209 mm, m S = Series 44 g Upon agreement, Special lengths also available. |
| mW | Series 33 g |
RMWE07-RB/23x../6
📏 8 mm
RMWE07-RB/47x../6
📏 8 mm
RMWE07-RB/47x../30
📏 8 mm
RMWE07-RB/95x../6
📏 8 mm
RMWE07-RB/23x../18
📏 8 mm
RMWE07-RB/95x../42
📏 8 mm
RMWE07-RB/63x../26
📏 8 mm
RMWE07-RB/63x../14
📏 8 mm
RMWE07-RB/95x../18
📏 8 mm
RMWE07-RB/63x../2
📏 8 mm
TZ3011
📏 8.5 mm
38RTZ3013
📏 8.5 mm
RMWE09A-RB/49x../10
📏 10 mm