HSE1000BXHFHTPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPR16V075S
Ball Bearing Units · Dimensions on request
12.2 Kg27 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPR16V075S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.2 Kg27 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.2 Kg27 lb |
| Catalogue Ref. | zt2Qzd2i10 |
| Bearing Number | 22216 |
| C - Dynamic Load (Basic) | 57200 lb254 kN |
| C0 - Static Load | 62500 lb278 kN |
| Dimension A | 79.5 mm3.13 in |
| Dimension B | 1Series 64.3 mm6.47 in |
| Dimension C | 106.4 mm4.19 in |
| Dimension D Max | 243.8 mm9.60 in |
| Dimension D Min | 203.2 mm8.00 in |
| Dimension E | 54.1 mm2.13 in |
| Dimension F | 275.1 mm10.83 in |
| Dimension G | 85.90 mm3.380 in |
| Dimension H | 29.5 mm1.16 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 96.0 mm3.78 in |
| Dimension RV | 7.6 mm0.30 in |
| Dimension SV | 83.6 mm3.29 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPR16V075ST |
| Grease Lubrication - B/C/O Seal | 1150 rpm |
| Grease Lubrication - M/N Seal | 1500 rpm |
| Grease Lubrication - T Seal | 2200 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1200 rpm |
| Oil Lubrication - M/N Seal | 1500 rpm |
| Oil Lubrication - T Seal | 2650 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 75 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450297042 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
QVFK17V211S
📏 Dimensions on request
RCJ1/2
📏 Dimensions on request
SAF 22636
📏 Dimensions on request
FSNT 520-617 - 21317 - VR317
📏 Dimensions on request
MSE615BXHFKPS
📏 Dimensions on request
LSM125BXHG
📏 Dimensions on request
QASN18A307S
📏 Dimensions on request
UC310
📏 Dimensions on request
UCT209-26
📏 Dimensions on request
VJ-PDNB 322
📏 Dimensions on request
E-PF-TRB-2 1/4
📏 Dimensions on request
E-4BF-TRB-70MM-ECC
📏 Dimensions on request
UCFC207-21
📏 Dimensions on request