UC310
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QASN18A307S
Ball Bearing Units · Dimensions on request
25.5 Kg56 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QASN18A307S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 25.5 Kg56 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 25.5 Kg56 lb |
| Catalogue Ref. | zuW5l2c6d8 |
| Bearing Number | 22218 |
| C - Dynamic Load (Basic) | 79700 lb355 kN |
| C0 - Static Load | 87200 lb388 kN |
| Dimension A | 112.0 mm4.41 in |
| Dimension B | 212 mm8.35 in |
| Dimension C | 130 mm5.12 in |
| Dimension D Max | 327.0 mm12.87 in |
| Dimension D Min | 290.0 mm11.42 in |
| Dimension F | 380.00 mm14.96 in |
| Dimension G | 86.00 mm3.390 in |
| Dimension H | 39.0 mm1.54 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension KA | 37.0 mm1.46 in |
| Dimension L | 109.0 mm4.29 in |
| Dimension M | 66.0 mm2.60 in |
| Dimension RA | 6.0 mm0.24 in |
| Dimension SA | 102.0 mm4.02 in |
| Eng Internal Radial Clearance - Max | 0.0039 |
| Eng Internal Radial Clearance - Min | 0.0024 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QASN18A307ST |
| Grease Lubrication - B/C/O Seal | 1000 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single Concentric |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.100 mm0.0039 in |
| Pre Install Clearance Min | 0.060 mm0.0024 in |
| Shaft Size | 3-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450355346 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| e - Geometry Factor | 0.23 |
UCT209-26
📏 Dimensions on request
VJ-PDNB 322
📏 Dimensions on request
E-PF-TRB-2 1/4
📏 Dimensions on request
E-4BF-TRB-70MM-ECC
📏 Dimensions on request
UCFC207-21
📏 Dimensions on request
UKP213 - H2313
📏 Dimensions on request
QAAFX10A050S
📏 Dimensions on request
SNT 517 - 22314 - TA314
📏 Dimensions on request
UC201-8
📏 Dimensions on request
MSE200BRHFRSS
📏 Dimensions on request
LSE1008BRHF
📏 Dimensions on request
SUCBFL207-20/F
📏 Dimensions on request
LCJT 1 7/16
📏 Dimensions on request