LSE208BXHF
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPN22V312S
Ball Bearing Units · Dimensions on request
38.1 Kg84 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPN22V312S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 38.1 Kg84 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 38.1 Kg84 lb |
| Catalogue Ref. | p7ryAS2V1M |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension A | 125.0 mm4.92 in |
| Dimension B | 240.5 mm9.47 in |
| Dimension C | 139.7 mm5.5 in |
| Dimension D Max | 368.3 mm14.50 in |
| Dimension D Min | 317.5 mm12.50 in |
| Dimension F | 406.4 mm16.00 in |
| Dimension G | 100.60 mm3.960 in |
| Dimension H | 50.8 mm2.00 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 114.3 mm4.50 in |
| Dimension RV | 9.4 mm0.37 in |
| Dimension SV | 104.9 mm4.13 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPN22V312ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 3-3/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450281430 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| e - Geometry Factor | 0.25 |
QMF11J203S
📏 Dimensions on request
SN 232C 1
📏 Dimensions on request
SCJ1/2
📏 Dimensions on request
QAAP10A115S
📏 Dimensions on request
ST206
📏 Dimensions on request
ST210
📏 Dimensions on request
C207
📏 Dimensions on request
ST209
📏 Dimensions on request
T204
📏 Dimensions on request
ST205
📏 Dimensions on request
T207
📏 Dimensions on request
C208
📏 Dimensions on request
C206
📏 Dimensions on request