SN 232C 1
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMF11J203S
Ball Bearing Units · Dimensions on request
6.4 Kg14 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMF11J203S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 6.4 Kg14 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 6.4 Kg14 lb |
| Catalogue Ref. | p8LHdO3m2k |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension BC | 175.0 mm6.89 in |
| Dimension C | 75.9 mm2.99 in |
| Dimension D | 130.30 mm5.130 in |
| Dimension E | 124.0 mm4.88 in |
| Dimension F | 157.2 mm6.19 in |
| Dimension H | 25.4 mm1.00 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension K | 28.7 mm1.13 in |
| Dimension L Exp | 84.Series 8 mm3.34 in |
| Dimension L Fix | 82.Series 8 mm3.26 in |
| Dimension N | 66.80 mm2.630 in |
| Dimension R | 3.3 mm0.13 in |
| Dimension S | 79.2 mm3.12 in |
| Dimension Series M | 50.5 mm1.99 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QMF11J203ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - Series M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1600 rpm |
| Oil Lubrication - Series M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450953788 |
| Y1 - Geometry Factor | 2.74 |
| Y2 - Geometry Factor | 4.08 |
| e - Geometry Factor | 0.25 |
SCJ1/2
📏 Dimensions on request
QAAP10A115S
📏 Dimensions on request
ST206
📏 Dimensions on request
ST210
📏 Dimensions on request
C207
📏 Dimensions on request
ST209
📏 Dimensions on request
T204
📏 Dimensions on request
ST205
📏 Dimensions on request
T207
📏 Dimensions on request
C208
📏 Dimensions on request
C206
📏 Dimensions on request
ST207
📏 Dimensions on request
ST212
📏 Dimensions on request