FSNT 528 - 22228K - TA528
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMPF13J208S
Ball Bearing Units · Dimensions on request
9.Series 10 KgSeries 20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMPF13J208S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 9.Series 10 KgSeries 20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 9.Series 10 KgSeries 20 lb |
| Catalogue Ref. | duL8E7daer |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 46400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 69.9 mm2.75 in |
| Dimension B | 147.3 mm5.8 in |
| Dimension C | 91.9 mm3.62 in |
| Dimension D Max | 193.8 mm7.63 in |
| Dimension D Min | 174.8 mm6.88 in |
| Dimension E | 44.5 mm1.75 in |
| Dimension F | 235.00 mm9.250 in |
| Dimension H | 24.9 mm0.98 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension K | 31.5 mm1.24 in |
| Dimension L | 92.2 mm3.63 in |
| Dimension R | 5.3 mm0.21 in |
| Dimension S | 85.6 mm3.37 in |
| Dimension Series G | 76.200 mm3.0000 in |
| Dimension Series M | 54.1 mm2.13 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMPF13J208ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - Series M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - Series M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450251037 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
SAK 1 15/16
📏 Dimensions on request
SNT 509 - 22209K - TA509
📏 Dimensions on request
SUCBFL207-23/F
📏 Dimensions on request
TTU-85-12
📏 Dimensions on request
QMF20J311S
📏 Dimensions on request
TAK 2 3/16
📏 Dimensions on request
HSM175BRHFKPS
📏 Dimensions on request
RCJ1 9/16
📏 Dimensions on request
QMFX22J407S
📏 Dimensions on request
TAFB20K308S
📏 Dimensions on request
PE210
📏 Dimensions on request
AK205
📏 Dimensions on request
PE214
📏 Dimensions on request