SAK 1 15/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN FSNT 528 - 22228K - TA528
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN FSNT 528 - 22228K - TA528 is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | dumbNx3K2O |
| A | 205.00 mm |
| A1 | 150 mm |
| A3 | 285 mm |
| Alternate Part Name | FSNT528 - 22228K - TA528 |
| Bearing | 22228K |
| Bolt Qty | 4 |
| C0 Static Load Rating | 1060 |
| C1 Dynamic Load Rating | 863 |
| Cage Type | EJ |
| G | M24 |
| H | 302 mm |
| H1 | 150.0 mm |
| H2 | 50.0 mm |
| Housing | FSNT 528 |
| Housing Mass | 39 Kg |
| J | 420 mm |
| J1 | 80.0 mm |
| J2 | 458 mm |
| L | 500 mm |
| Locating Rings (width x OD) | SR250X15 |
| Locknut | KM28 |
| Lockwasher | MB28 |
| Material | Cast Iron |
| Max Grease Speed | 2200 |
| Max Oil Speed | 2600 |
| N | 26 mm |
| N1 | 32.00 mm |
| Seal | TA528 |
| Seal Type | Taconite |
| Shaft Diameter d | 125 mm |
| UPC Code | 999999999 |
SNT 509 - 22209K - TA509
📏 Dimensions on request
SUCBFL207-23/F
📏 Dimensions on request
TTU-85-12
📏 Dimensions on request
QMF20J311S
📏 Dimensions on request
TAK 2 3/16
📏 Dimensions on request
HSM175BRHFKPS
📏 Dimensions on request
RCJ1 9/16
📏 Dimensions on request
QMFX22J407S
📏 Dimensions on request
TAFB20K308S
📏 Dimensions on request
PE210
📏 Dimensions on request
AK205
📏 Dimensions on request
PE214
📏 Dimensions on request
PE215
📏 Dimensions on request