TAMC26K407S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAP11A203S
Ball Bearing Units · Dimensions on request
7.7 Kg17.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAP11A203S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 7.7 Kg17.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.7 Kg17.0 lb |
| Catalogue Ref. | e7VQX67P7Q |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension A | 63.5 mm2.50 in |
| Dimension B | 133.4 mm5.25 in |
| Dimension C | 82.6 mm3.25 in |
| Dimension D Max | 200.2 mm7.88 in |
| Dimension D Min | 165.1 mm6.50 in |
| Dimension F | 244.6 mm9.63 in |
| Dimension H | 31.Series 8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension KA | 28.7 mm1.13 in |
| Dimension L | 84.3 mm3.Series 32 in |
| Dimension SA | 79.5 mm3.13 in |
| Dimension Series G | 66.80 mm2.630 in |
| Dimension Series M | 50.Series 8 mm2 in |
| Dimension Series RA | 4.Series 8 mm0.19 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QAP11A203STNG |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - Series M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single Concentric |
| Oil Lubrication - B/C/O Seal | 1600 rpm |
| Oil Lubrication - Series M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450960960 |
| Y1 - Geometry Factor | 2.95 |
| Y2 - Geometry Factor | 4.40 |
| e - Geometry Factor | 0.23 |
E-TTU-TRB-3 1/4-ECO/ECC
📏 Dimensions on request
1207KR
📏 Dimensions on request
SNT 506-605 - 22206K - TA506/ 1
📏 Dimensions on request
GY1115KRRB SGT
📏 Dimensions on request
SCJ1 15/16
📏 Dimensions on request
TAFK15K207S
📏 Dimensions on request
QVVF19V085S
📏 Dimensions on request
E-TTU-TRB-85MM-ECO
📏 Dimensions on request
SAF 22540 7-1/4
📏 Dimensions on request
C-UKF211D1;H2311X
📏 Dimensions on request
PA207
📏 Dimensions on request
F204
📏 Dimensions on request
PA206
📏 Dimensions on request